Absorptive Attenuator. MAAV-007090 Datasheet

MAAV-007090 Attenuator. Datasheet pdf. Equivalent

MAAV-007090 Datasheet
Recommendation MAAV-007090 Datasheet
Part MAAV-007090
Description Voltage Variable Absorptive Attenuator
Feature MAAV-007090; MAAV-007090 Voltage Variable Absorptive Attenuator, 1700 - 2000 MHz Features  Input IP3: +31 dBm Mi.
Manufacture MA-COM
Datasheet
Download MAAV-007090 Datasheet




MA-COM MAAV-007090
MAAV-007090
Voltage Variable Absorptive
Attenuator, 1700 - 2000 MHz
Features
Input IP3: +31 dBm Min (Full Attenuation Range)
Input IP3 is 15 -20 dB Better than GaAs
Linear Operation: +20 dBm Typ.
35 dB Dynamic Range (With 30 mA Bias Current)
Single Control Voltage
50 ohm Impedance
Linear Driver, MADR-007098-000100, Available
Test Boards are Available
Tape and Reel Packaging Available
Lead-Free SOW-16 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of AT10-0017
Description
M/A-COM's MAAV-007090-000100 is a PIN diode
based voltage variable attenuator. This device is in a
SOW-16, wide body plastic surface mount package.
These attenuators have linear operating power and
input intercept point levels 15 - 20 dB better than
GaAs FET MMIC voltage variable attenuators. They
are ideally suited for use where low distortion, high
linear operating power and high dynamic range are
required. These devices are optimized for the PCS
frequency band, but exhibit excellent performance
and repeatability over the entire specified frequency
band. The MAAV-007090-000100 is ideally suited
for wireless communications systems.
Ordering Information
Part Number
MAAV-007090-000100
MAAV-007090-0001TR
MAAV-007090-0001TB
MAAV-007090-DR01TB
Package
Tube
1000 piece reel
Unit Mounted on Test Board
Unit with Driver on Test Board
Note: Reference Application Note M513 for reel size
information.
Functional Schematic
Rev. V2
Pin Configuration
Pin No.
1
2
3
4
5
6
7
8
Function
GND
RF
GND
GND
GND
GND
BIAS1
GND
Pin No.
9
10
11
12
13
14
15
16
Function
GND
RF
GND
GND
GND
GND
BIAS1
GND
1. Bias currents may be applied to pin 7 or 15. The unused pins
should be isolated.
1 * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support



MA-COM MAAV-007090
MAAV-007090
Voltage Variable Absorptive
Attenuator, 1700 - 2000 MHz
Rev. V2
Electrical Specifications: TA = 25°C, Z0 = 50
Parameter
Insertion Loss
Attenuation
(Above Loss)
Attenuation
Flatness
VSWR
Switching Speed
Linear Operation
Input IP3
I Control
Test Conditions
0 volts
10 mA bias current
0 to 30 dB attenuation
0 to 30 dB attenuation
50% Control to 90%/10%
RF
Two-tone inputs up to +10
dBm
Frequency
1700-2000 MHz
1930 - 1990 MHz
1700-2000 MHz
1930 - 1990 MHz
1700-2000 MHz
1930 - 1990 MHz
1700-2000 MHz
1930 - 1990 MHz
1700-2000 MHz
1700-2000 MHz
1700-2000 MHz
1700-2000 MHz
Units
dB
dB
dB
dB
dB
dB
Ratio
Ratio
µs
dBm
dBm
mA
Min
28
30
——-
+31
Typ
2.5
35
1.5
0.4
1.6:1
1.5:1
+20
-
-
Max
3.5
3.0
2.0
0.6
1.8:1
1.7:1
3.0
30
Absolute Maximum Ratings 2,3
Parameter
Max. Input Power
1700 - 2000 MHz
Operating Temperature
Storage Temperature
Absolute Maximum
+27 dBm
-40°C to +85°C
-65°C to +125°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
Recommended PCB Configuration
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support



MA-COM MAAV-007090
MAAV-007090
Voltage Variable Absorptive
Attenuator, 1700 - 2000 MHz
Typical Performance Curves
Insertion Loss
- 4 0 °C
+2 5°C
+8 5°C
5.0
4.0
3.0
2.0
1.0
1600
1700
1800
1900
2000
Fre que ncy (MHz )
2100
Typical VSWR @ +25°C
3 0 d B 15 d B R ef
2.5
2.0
1.5
1.0
1600
1700
1800
1900
2000
Fre que ncy (MHz )
2100
Rev. V2
Attenuation Flatness (dB) @ +25°C
2.00
1.00
0.00
-1.00
-2.00
1600
R ef 10 d B 2 0 d B 3 0 d B
1700
1800
1900
2000
Fre que ncy (MHz )
2100
Attenuation vs. Bias Current,
Frequency = 2000 MHz
- 4 0 °C
+2 5 °C +8 5 °C
40
30
20
10
0
0 1 2 3 4 5 6 7 8 9 10
Bias Current (mA)
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)