Absorptive Attenuator. MAAV-007092 Datasheet

MAAV-007092 Attenuator. Datasheet pdf. Equivalent

MAAV-007092 Datasheet
Recommendation MAAV-007092 Datasheet
Part MAAV-007092
Description Voltage Variable Absorptive Attenuator
Feature MAAV-007092; MAAV-007092 Voltage Variable Absorptive Attenuator, 800 - 1000 MHz Rev. V2 Features  Input IP3: .
Manufacture MA-COM
Datasheet
Download MAAV-007092 Datasheet




MA-COM MAAV-007092
MAAV-007092
Voltage Variable Absorptive
Attenuator, 800 - 1000 MHz
Rev. V2
Features
Input IP3: +35 dBm Min (Full Attenuation Range)
Input IP3 is 15 -20 dB Better than GaAs
Linear Operation: +20 dBm Typ.
Plastic, 28 Lead, 6 mm CSP, SMT Package
35 dB Dynamic Range (With 30 mA Bias Current)
Single Control Voltage
50 ohm Impedance
Linear Driver, MADR-007098-000100, Available
Test Boards are Available
Tape and Reel Packaging Available
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of MAAVCC0001
Functional Schematic
Description
M/A-COM's MAAV-007092-000100 is a PIN diode
based voltage variable attenuator. This device is in a
6mm square, 28 lead, plastic CSP Package, suitable
for surface mounting on PCBs. These attenuators
have linear operating power and input intercept point
levels 15 - 20 dB better than GaAs FET MMIC
voltage variable attenuators. They are ideally suited
for use where low distortion, high linear operating
power and high dynamic range are required. These
devices are optimized for the GSM frequency band,
but exhibit excellent performance and repeatability
over the entire specified frequency band. The
MAAV-007092-000100 is ideally suited for wireless
communications systems.
Pin Configuration2
Pin #
1
2
3
4
Function
N/C
N/C
N/C
N/C
Pin #
15
16
17
18
Function
N/C
N/C
N/C
N/C
5 N/C 19 N/C
6 N/C 20 N/C
Ordering Information
Part Number
MAAV-007092-000100
MAAV-007092-0001TR
Package
Bulk Packaging
1000 piece reel
7 N/C 21 N/C
8 N/C 22 N/C
9 BIAS1 23 BIAS 1
10 N/C 24 N/C
11 N/C 25 N/C
12 GND 26 GND
MAAV-007092-0001TB
Sample Test Board
13 RF OUT 27
RF IN
14 GND 28 GND
Note: Reference Application Note M513 for reel size
information.
1. Bias current may be applied to Pin 9 or 23. However, the
unused Pin must be isolated.
2. The exposed pad centered on the package bottom must be
* Restrictions on Hazardous Substances, European Union Directive 2002/95/ECc.onnected to RF and DC ground. (For PQFN Packages)
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support



MA-COM MAAV-007092
MAAV-007092
Voltage Variable Absorptive
Attenuator, 800 - 1000 MHz
Electrical Specifications: TA = 25°C
Parameter
Insertion Loss
Test Conditions
0 volts
Attenuation
(Above Loss)
Attenuation
Flatness
VSWR
10 mA bias current
0 to 30 dB attenuation
0 to 30 dB attenuation
Switching Speed
Linear Operation
Input IP3
I Control
50% Control to 90%/10% RF
Two-tone inputs up to +10 dBm
Frequency
800-1000 MHz
925 - 960 MHz
800-1000 MHz
925 - 960 MHz
800-1000 MHz
925 - 960 MHz
800-1000 MHz
925 - 960 MHz
800-1000 MHz
800-1000 MHz
800-1000 MHz
800-1000 MHz
Units
dB
dB
dB
dB
dB
dB
Ratio
Ratio
µs
dBm
dBm
mA
Min.
30
30
+35
Typ.
3.6
3.5
34
34
2.3
0.4
1.5:1
1.3:1
+20
+40
Absolute Maximum Ratings 3,4
Parameter
Max. Input Power
Operating Temperature
Storage Temperature
Absolute Maximum
+27 dBm
-40°C to +85°C
-65°C to +125°C
3. Exceeding any one or combination of these limits may cause
permanent damage to this device.
4. M/A-COM does not recommend sustained operation near
these survivability limits.
Recommended PCB Layout
Rev. V2
Max.
4.2
3.9
3.0
0.8
1.9:1
1.8:1
10.0
-
30
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support



MA-COM MAAV-007092
MAAV-007092
Voltage Variable Absorptive
Attenuator, 800 - 1000 MHz
Typical Performance Curves
Insertion Loss
- 4 0 °C
4.5
+ 2 5 °C
+ 8 5 °C
4.0
3.5
3.0
2.5
800
850 900 950
Frequency (MHz)
1000
Rev. V2
Typical VSWR @ +25°C
15 d B 3 0 d B
1.8
R ef
1.6
1.4
1.2
1
800 850 900 950
Fre que ncy (MHz )
1000
Attenuation Flatness @ +25°C
5 d B 10 d B
1.5
20 dB 30 dB
1.0
0 .5
0 .0
- 0 .5
-1.0
-1.5
800
850 900 950
Fre que ncy (MHz )
10 0 0
Attenuation vs. Bias Current,
Frequency = 1000 MHz
- 4 0 °C + 2 5 °C + 8 5 °C
42
36
30
24
18
12
6
0
0 1 2 3 4 5 6 7 8 9 10
Bias Current (mA)
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)