Receiver. MADC-010736 Datasheet

MADC-010736 Receiver. Datasheet pdf. Equivalent

MADC-010736 Datasheet
Recommendation MADC-010736 Datasheet
Part MADC-010736
Description Receiver
Feature MADC-010736; MADC-010736 Receiver, High IIP3, SMD 40.5 - 43.5 GHz Rev. V2 Features  Integrates LNA, Image Rej.
Manufacture MA-COM
Datasheet
Download MADC-010736 Datasheet




MA-COM MADC-010736
MADC-010736
Receiver, High IIP3, SMD
40.5 - 43.5 GHz
Rev. V2
Features
Integrates LNA, Image Reject Mixer, LO Doubler,
and LO Buffer
3.5 dB Noise Figure
12 dB Conversion Gain
30 dBc Image Rejection
9 dBm Input Third Order Intercept @ 2 GHz IF
Lead-Free 6 mm Laminate Package
RoHS^ Compliant
Description
The MADC-010736 is an integrated USB receiver
that has a noise figure of 3.5 dB and a typical
conversion gain of 12 dB. The integrated mixer
provides image rejection of 30 dBc. I and Q mixer
outputs are provided and an external 90° hybrid is
required to complete the image rejection function.
The device integrates an LNA, image reject mixer
and LO buffer/doubler within a 6 mm laminate
package. It is ideally suited for 42 GHz band
point-to-point radios.
Each device is 100% RF tested to ensure
performance compliance. The part is fabricated
using an efficient pHEMT process.
The MTTF is > 1,000,000 hours at a 150oC junction
temperature.
Ordering Information1,2
Part Number
Package
MADC-010736-000000
Bulk Quantity
MADC-010736-TR0200
200 Piece Reel
MADC-010736-TR0500
500 Piece Reel
MADC-010736-001SMB Sample Evaluation board
1. Reference Application Note M513 for reel size information.
2. All sample boards include 3 loose parts.
Functional Schematic
VD2 VG2 VD1 VG1
VD3
VG3
1
2
LO 3
13 12 11 10
LNA
BUF
2X
BUF IRM
Q* Q I I*
9 RF
8 VG4
4 567
Q* Q I
I*
Pin Configuration3,4
Pin No.
Function
1 VD3
2 VG3
3 LO
4 Q* Input5
5 Q Input
6 I Input
7 I* Input5
8 VG4
9 RF
10 VG1
11 VD1
12 VG2
13 VD2
3. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
4. MACOM recommends connecting unused package pins to
ground.
5. IF pins I* and Q* may be left open (unused) for un-balanced IF
operation.
^Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support



MA-COM MADC-010736
MADC-010736
Receiver, High IIP3, SMD
40.5 - 43.5 GHz
Rev. V2
Electrical Specifications6:
TB = 25°C, VD1,2,3 = 4.0 V, ID1 = 10 mA, ID2 = 100 mA, VG3 = -0.4 V, VG4 = -3 V, IF = 3.5 GHz
Parameter
Units
Min.
Typ.
Max.
Frequency Range (RF)
GHz 40.5 43.5
Frequency Range (LO)
GHz 18.5
21.75
Frequency Range (IF)
GHz DC 3.5
Conversion Gain
dB 10 12
Image Rejection
dBc 30
Input IP3
dBm
6
Noise Figure
dB 3.5 5.0
LO Power
dBm
0
IF Return Loss
dB 15
RF Return Loss
dB 18
LO Return Loss
dB 15
DC Current (ID1+ID2+ID3)
mA 290
6. Apply gate voltages prior to drain voltages. Adjust VG1, VG2 and VG3 between 1.0 and 0.1 V to achieve specified drain current.
Typical current, 290 mA = 10 ( ID1) + 100 (ID2) + 180 (ID3). Refer to App Note [1] for biasing details.
Maximum Operating Ratings7,8
Parameter
Absolute Maximum
Input Power
+5 dBm
Drain Supply Voltage
+4.3 Volts
Operating Temperature
-40°C to +85°C
Junction Temperature
+150°C
Storage Temperature
-55°C to +150°C
7. Exceeding any one or combination of these limits may cause
permanent damage to this device.
8. MACOM does not recommend sustained operation near these
survivability limits.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support



MA-COM MADC-010736
MADC-010736
Receiver, High IIP3, SMD
40.5 - 43.5 GHz
Typical Performance Curves: TA = 25°C
Conversion Gain @ 3.5 GHz IF
25
20
15
10
5
0
40.5 41.0 41.5 42.0 42.5 43.0 43.5
Frequency (GHz)
IP3 @ 3.5 GHz IF
25
20
15
Input IP3
Output IP3
10
5
0
40.5 41.0 41.5 42.0 42.5 43.0 43.5
Frequency (GHz)
Image Rejection @ 3.5 GHz IF
0
Rev. V2
Conversion Gain @ 2.0 GHz IF
25
20
15
10
5
0
40.5 41.0 41.5 42.0 42.5 43.0 43.5
Frequency (GHz)
IP3 @ 2.0 GHz IF
25
20
15 Input IP3
Output IP3
10
5
0
40.5 41.0 41.5 42.0 42.5 43.0 43.5
Frequency (GHz)
Image Rejection @ 2.0 GHz IF
0
-10 -10
-20 -20
-30 -30
-40
40.5 41.0 41.5 42.0 42.5 43.0 43.5
3 Frequency (GHz)
-40
40.5 41.0 41.5 42.0 42.5 43.0 43.5
Frequency (GHz)
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)