LCD Module
INNOLUX DISPLAY CORPORATION
BT156GW01 V.2 LCD MODULE SPECIFICATION
( ) Preliminary Specification (●) Final Specificatio...
Description
INNOLUX DISPLAY CORPORATION
BT156GW01 V.2 LCD MODULE SPECIFICATION
( ) Preliminary Specification (●) Final Specification
Customer
Checked & Approved by
Approved by MKT
Checked by PD
Prepared by PM
Annie Lu
Date: 2009/07/22
Innolux Display Corporation
No.160 Kesyue Rd., Chu-Nan Site, Hsinchu Science Park,
Chu-Nan 350, Miao-Li County, Taiwan
Tel: 886-37-586000
Fax: 886-37-586060
Version: 1.3
Record of Revision
InnoLux copyright All rights reserved, Copying forbidden.
Version Revise Date 0.0 2009/03/06
Page All First Edition issued
Content
2
→Glass Thickness 0.5mm →LED life time with LCM 12,000 hrs
→Stable rush current value on Specification
6
→BL power consumption @100 nits with full white pattern →Logic power consumption @100 nits with full white pattern
→Total power consumption @100 nits with full white pattern
13 LED Circuit block
1.0 2009/03/30
→Uniformity 1.25 on avg. of 5 points
14 →Uniformity 1.5 on avg. of 13 points
→View Angle at CR≧100: 25 /25 / 11 / 6 (Right / Left / Bottom / Top)
Write the word “In order to avoid IC damage, it is not allowed to have 22 such overlapping as cables or antennas, camera, WLAN, WWAN over
these COF locations” by red color on Specification of 2 D drawing
23
→COF, T-con, VR location →Module exploding map
20 Box Label content update
1.1 2009/05/07 24 System Cover Design Notice
25 EDID code update
LED PWM frequency 1000Hz (Typ.)
12 Add Note for PWM duty ratio linearity 10%~100%
1.2 2009/05/18
→Uniformity 1....
Similar Datasheet