Document
Magnetics
High Power High Performance Molded Surface Mount Inductors
Model HA72T-06 Series
Features
Operating & Storage Temperature -55°C to +180°C Temperature Rise, Maximum 50°C Operating Frequency Up to 3MHz AEC-Q200 CERTIFIED
Specification @ 25°C
Part Number
(1)
InμdHu±ct2a0n%ce
Heating Current(2)
(Adc)
(3)
(IAsadtc)
DCR (mΩ) Typ. Max.
HA72T-06R10LF
0.10
26.2
45.0
1.5
1.7
HA72T-06R20LF
0.20
20.3
34.0
2.5
2.8
HA72T-06R33LF
0.33
18.0
22.0
3.2
3.9
HA72T-06R47LF
0.47
16.1
19.0
4.0
4.2
HA72T-06R68LF
0.68
14.4
16.5
5.0
5.5
HA72T-061R0LF
1.00
10.3
15.0
9.0
10.0
HA72T-061R5LF
1.50
8.4
10.0 13.0 14.0
HA72T-062R2LF
2.20
8.3
8.5 18.0 20.0
HA72T-063R3LF
3.30
6.6
8.0 26.5 30.0
HA72T-064R7LF
4.70
5.4
6.5 39.0 42.0
HA72T-066R8LF
6.80
4.1
5.0 62.0 68.0
HA72T-068R2LF
8.20
3.5
4.2 80.0 100.0
HA72T-06100LF
10.0
3.2
4.0
100.0
105.0
HA72T-06330LF
33.0
1.8
2.5
302.0
332.0
Notes:
(1) Inductance is measured at 100 kHz, 0.1Vac without DC current.
(2) The Heating Current is the approximate DC current which causes the component temperature to increase by 50°C. This current is determined by soldering
the component on a typical application PCB, and then applying the current to the device for 30 minutes.
(3) The saturation current (Isat) is the approximate current at which the inductance will be decreased by 20% typical from its initial (zero DC) value.
(4) The part temperature (ambient + temperature rise) should not exceed 180°C.
Outline Dimensions (mm)
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
BI Technologies A-1445, Jalan Tanjung Api 25050 Kuantan Pahang Darul Makmur
Malaysia Ph: +60 9 565 8888 Fax: +60 9 514 3555 http://www.ttelectronics.com/customer-service-enquiry
Rev. 02 8.17
High Power High Performance Molded Surface Mount Inductors
Model HA72T-06 Series
Electrical Characteristic @ 25°C
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
BI Technologies
A-1445, Jalan Tanjung Api
High Power25050 Kuantan Pahang Darul Makmur Malaysia
HighPh: +60 9 565 8888 Fax: +60 9 514 3555
http://www.ttelectronics.com/customer-service-enquiry
Rev. 02 8.17
Molded Surface Mount Inductors
Model HA72T-06 Series
Packaging / Ordering Information
One reel (13”)
2000 pcs
One shipping carton (6 reels) 12000 pcs
Ordering Information
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
BI Technologies A-1445, Jalan Tanjung Api 25050 Kuantan Pahang Darul Makmur
Malaysia Ph: +60 9 565 8888 Fax: +60 9 514 3555 http://www.ttelectronics.com/customer-service-enquiry
Rev. 02 8.17
.