SMA5-5

A5-5 / SMA5-5 Cascadable Amplifier 5 to 500 MHz Rev. V2 Features  AVAILABLE IN SURFACE MOUNT  FLAT BANDWIDTH ± 1 Db (TYP.)  LOW VSWR .1.2:1  WIDE POWER SUPPLY RANGE: +8 to +15 VOLTS  EXCELLENT PHASE LINEARITY ±.8O (TYP.) Product Image Description The A5-5 RF amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This single stage bipolar transistor feedback amplifier design displays impressive performance over a broadband frequency range. Both TO-8 and Surface Mount packages are Hermetically sealed, and MIL-STD-883 environmental screening is available. Ordering Information Part Number A5-5 MAAM-008714-0SMA55 MAAM-008714-00CA55 Package TO-8 Surface Mount SMA Connectorized ** ** The connectorized version is not RoHs compliant. Electrical Specifications: Z0 = 50, VCC = +15 VDC Absolute Maximum Ratings Parameter Frequency Small Signal Gain (min) Gain Flatness (max) Reverse Isolation Noise Figure (max) Power Output @ 1 dB comp. (min) IP3 Units MHz dB dB dB dB dBm dBm Typical 25ºC 1-650 15.5 ±0.1 21 4.0 9.0 +21 Guaranteed 0º to 50ºC -54º to +85ºC* 5-500 5-500 14.0 13.5 ±0.5 ±0.7 5.0 5.5 7.0 6.5 Parameter Absolute Maximum Storage Temperature -62ºC to +125ºC Case Temperature +125ºC DC Voltage +17 V Continuous Input Power +13 dBm Short Term Input power (1 minute max.) 50 mW Peak Power (3 µsec max.) 0.5 W “S” Series Burn-In Temperature (case) +125ºC Thermal Data: VCC = ...