AM-160

AM-160 Low Noise Amplifier, 28 dB Gain, 100 - 600 MHz Features  1.6 dB Typical Midband Noise Figure  +19 dBm Typical 1 dB Compression Point  +30 dBm Typical Third Order Intercept Description M/A-COM’s AM-160 is a coupler feedback amplifier with high intercept and compression points. The use of coupler feedback minimizes noise figure and current in a high intercept amplifier. This amplifier is packaged in a flatpack with flanges. Due to the metal flatpack the thermal rise is minimized. The ground plane on the PC board should be configured to remove heat from under the package. AM-160 is ideally suited for use where a high intercept, high reliability amplifier is required. FP-9 Rev. V3 Absolute Maximum Ratings 1 Parameter Max. Input Power Vbias Operating Temperature Storage Temperature Absolute Maximum +10 dBm +15.75 V -55°C to +85°C -65°C to +125°C 1. Operation of this device above any one of these parameters may cause permanent damage. Ordering Information Part Number AM-160 PIN Package Flatpack Pin Configuration Pin No. 1 2 3 4 5 Function RF OUT GND GND GND VDC Pin No. 6 7 8 9 10 Function RF IN GND GND GND VDC 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support AM-160 Low Noise Amplifier, 28 dB Gai...