Advanced Power
Electronics Corp.
APE8973
3A ULTRA LOW DROPOUT LINEAR REGULATOR
FEATURES
Ultra Low Dropout - 0.23V(ty...
Advanced Power
Electronics Corp.
APE8973
3A ULTRA LOW DROPOUT LINEAR
REGULATOR
FEATURES
Ultra Low Dropout - 0.23V(typical) at 3A Output Current Low ESR Output Capacitor (Multi-layer Chip Capacitors (MLCC) Applicable 0.8V Reference Voltage Fast Transient Response Adjustable Output Voltage by External Resistors Power-On-Reset Monitoring on Both VCNTL and VIN Pins Internal Soft-Start Under-Voltage Protection Current-Limit and Thermal Shutdown Protection Power-OK Output with a Delay Time ESOP-8 and DFN 3x3-10L Pb-Free Package.
DESCRIPTION
The APE8973 is a 3A ultra low dropout linear
regulator. This product is specifically designed to provide well supply voltage for front-side-bus termination on motherboards and NB applications. The IC needs two supply voltages, a control voltage for the circuitry and a main supply voltage for power conversion, to reduce power dissipation and provide extremely low dropout. The APE8973 integrates many functions. A Power-On-Reset (POR) circuit monitors both supply voltages to prevent wrong operations. A thermal shutdown and current limit functions protect the device against thermal and current over-loads. A POK indicates the output status with time delay which is set internally. It can control other converter for power sequence. The APE8973 can be enabled by other power system. Pulling and holding the EN pin below 0.3V shuts off the output.
The APE8973 is available in ESOP-8 and DFN 3x310L packages which features small size as an Exposed Pad to...