MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 1-800-831-4881 Email:
[email protected] Web: www.mdesemiconductor.com
HSMBJSAC SERIES
LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE- 5.0 TO 50 Volts 500 Watt Peak Pulse Power
FEATURES
• Plastic package has Underwriters Laboratory Flammability Classification 94 V-O
• Glass passivated junction • 500W Peak Pulse Power
capability on 10/1000 µs waveform • Glass passivated junction • Low incremental surge resistance • Excellent clamping capability • Repetition rate (duty cycle): 0.01% • Fast response time: typically less than
1.0 ns from 0 volts to V(BV) • Ideal for data line applications • High temperature soldering guaranteed:
265°C/10 seconds/ .375", (9.5mm) lead length, 5lbs., (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-15 Molded plastic over glass passivated junction Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denoted positive end (cathode) except Bipolar Mounting Position: Any Weight: 0.003 ounces, 0.093 grams
Dimensions in inches (millimeters)
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
RATING
SYMBOL
VALUE
Peak Pulse Power Dissipation on 10/1000 µs waveform (NOTE 1, Fig.1)
PPPM
Minimum 500
Peak Pulse Current of on 10/1000 µs waveform (Note 1,Fig 3)
IPPM SEE TABLE 1
Steady State Power Dissipation at TL = 75°C Lead lengths .375", 9.5mm
PM(AV)
3.0
Operatings and Storage Temperature Range NOTES:
TJ, TSTG
-55 +175
1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.
Certified RoHS Compliant UL File # E223026
UNITS Watts Amps Watts
°C
11/13/2013
MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 1-800-831-4881 Email:
[email protected] Web: www.mdesemiconductor.com
RATINGS AND CHARACTERISTIC CURVES HSMBJSAC SERIES
TA=25℃ unless otherwise noted
100
Pig.1 - Peak Pulse Power Rating Curve
30 Non-repetitive Pulse Waveform shown in Fig. 3 TA=25°C
10
Fig.2-Power Derating Curve
Average Power
Peak Power (single pulse)
Percentage of Rated Power(%)
IPPM-Peak Pulse Power (kW)
1
PPK".5"
td
Impulse
Exponential Decay
PPK td Half Sine td=7tp
PPK
Square
td
0.1 Current Waveforms 0.1s 1.0s
10s
100s
1.0ms
10ms
0 0
td - Pulse Width (sec.)
TL Lead Temperature (°C)
IPPM - Peak Pulse Current,% IRSM
Fig.3 - Pulse Waveform
150
tr = 10μsec.
TJ = 25°C Pulse Width (td) is defined as the point
100
Peak Value IPPM
where the peak current decays to 50% of IPPM
Half Value- IPPM 2
50 10/1000μsec.Waveform as defined by R.E.A.
td
0 0 1.0
2.0 3.0 t - Time(ms)
3.0 4.0 4.0
Fig. 4 - AC Line Protection Application
Low Capacitance TVS
Application Note: Device must be used with two units in parallel,opposite in polarity as shown in circuit for AC signal line protection.
11/13/2013
MD.