P6SMB11CA

600W Surface Mount Transient Voltage Suppressor P6SMB6.8A - P6SMB250CA 600W Surface Mount Transient Voltage Suppressor Features SMB z Breakdown voltage from 6.8 to 250 volts z Low inductance, excellent clamping capability z Repetition rate(duty cycle): 0.01% z Fast response time: typically less than 1.0ps from 0v to VBR z For unidirectional types z Typical IR less than 1 µA above 10V z High temperature soldering guaranteed:250°C/10 seconds at terminals z This series is UL recognized under component index. File number E315008 z RoHS Compliant Mechanical Data Case: Epoxy: Terminals: Polarity: Mounting position: Weight: JEDEC DO-214AA (SMB) molded plastic over glass passivated junction Meets UL 94V-0 flammability rating Solder plated, solderable per MIL-STD-750, Method 2026 Color band denoted positive end (cathode) except Bi-directional Any 0.003 ounces, 0.093 gram Maximum Ratings (T Ambient=25ºC unless noted otherwise) Symbol Description Value PPPM IPPM Peak Pulse Power Dissipation on 10/1000μs Waveform Peak Pulse Current on 10/1000μs Waveform Minimum 600 See Table IFSM Peak Forward Surge Current TJ,TSTG Operating Junction and Storage Temperature Range 100 -55 to 150 Unit W A A °C Conditions Non-repetitive current pulse, per FIG.3 and derated above TA=25° C per FIG.2 Non-repetitive current pulse 8.3ms single half sine-wave superimposed on rated load, (JEDEC Method) (Note 1,2) Note: 1. Mounted on 5.0mm x 5.0mm (0.03mm thick) copper pads to each terminal 2. 8...