Document
SCT04N60D
Triac
600V, 4A STANDARD TRIAC
This device is suitable for low power AC switching application, phase control application such as fan speed and temperature modulation control, lighting control and static switching relay.
Features
y Repetitive Peak Off-State Voltage : VDRM=600V y R.M.S On-State Current : IT(RMS)=4A y High Commutation: (dI/dt)C =3.7 A/㎳(Min)
1 2 3
2, 4
4
1: T1 2, 4: T2 3 3: Gate 1
TO-252
Product Characteristics
Symbol
Rating
IT(RMS) VDRM
4A 600V
Applications
y Switching mode power supply, light dimmet y TV sets, stereo, refrigerator, washing machine y Electric blanket, solenoid driver, small motor control y Photo copier, electric tool
Marking Diagram
SCT 04N60 YWW
Ordering Information
Device
Marking Code
SCT04N60D
SCT04N60
Package TO-252
Column 1, 2 : Device Code Column 3: Year & Week Code
Absolute Maximum Ratings (Limiting Values)
Characteristic Repetitive Peak Off-state Voltage RMS on-state current (full sine wave) Non- repetitive surge peak on-state current (full cycle, Tj initial = 25℃) I2t Value for fusing Peak gate current Peak gate power dissipation Average gate peak dissipation Storage temperature range Operating junction temperature range
Symbol VDRM IT(RMS)
ITSM
I2t IGM PGM PG(AV) Tstg Tj
KSD-S6O001-000
Value 600
4
38
6 4 5 0.5 -40 to +150 -40 to +125
Unit V A
A A2s A W W ℃ ℃
1
Thermal Characteristics
Characteristic Maximum thermal resistance junction to case (AC) Maximum thermal resistance junction to ambient (AC)
SCT04N60D
Symbol Rth(j-c) Rth(j-a)
Value 3.2 70
Unit ℃/W ℃/W
Electrical Characteristics (TJ=25℃, unless otherwise specified)
Off Characteristics
Characteristic
Symbol
Test Condition
Repetitive peak Off-state current
IDRM
VD = VDRM
Repetitive peak reverse current
IRRM
VR = VRRM
On Characteristics
Characteristic
Symbol
Test Condition
Peak On-state voltage Holding current
Gate trigger current
Gate trigger voltage Gate Non-trigger voltage
VTM IH IGT (Ⅰ-Ⅱ-Ⅲ) IGT (Ⅳ) VGT (Ⅰ-Ⅱ-Ⅲ) VGD
IT = 5.5A VD = 12V, IT = 0.2A VD = 12V, RL = 30Ω VD = 12V, RL = 30Ω VD = 2/3 VDRM, Tj=125℃
Dynamic Characteristics
Characteristic
Critical rate of rise of Off-state Voltage Rate of Change of Commutation Current
Critical rate of rise of on-state current
Symbol (dV/dt)S (dI/dt)C
dI/dt
Test Condition
VD = 2/3 VDRM, Tj=125℃
(dV/dt)C=10V/㎲↓, Tj=125℃ f=120hz, IG = 2×IGT tr≤100 ㎱, Tj=125℃
Min. -
Min. -
0.2
Min. 200 3.7
-
Typ. -
Typ. -
Typ. -
Max. 5 5
Unit uA μA
Max. 1.55 40 30
1.3
-
Unit V mA mA mA V V
Max. Unit - V/ μS - A/㎳ 50 A/ μS
Simple circuit for (dV/dt)S
Simple circuit for (dI/dt)C vs (dV/dt)C
Simple circuit for dI/dt
KSD-S6O001-000
2
Electrical Characteristic Curves
Fig. 1 P – IT(RMS)
SCT04N60D
Fig. 2 IT(RMS) – TC
㎃ ㎳A
AW
Fig. 3 IT - VT
Fig. 4 (dI/dt)C - (dV/dt)C
Fig. 5 IGT- Tj
Fig. 6 IT - IGT
㎲
KSD-S6O001-000
㎃
3
㎃
㎃ ㎃
Electrical Characteristic Curves
Fig. 7 VGT- Tj
SCT04N60D
Fig. 8 IT - VGT
Fig. 9 IH- VT
KSD-S6O001-000
4
Outline Dimension
SCT04N60D
※Recommend PCB solder land [Unit: mm]
7.00
7.00
2.50
1.50
4.60
KSD-S6O001-000
5
SCT04N60D
The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.).
Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp..
Specifications mentioned in this publication are subject to change without notice.
KSD-S6O001-000
6
.