enCoRe III Full-Speed USB Controller
CY7C64215
enCoRe™ III Full-Speed USB Controller
enCoRe™ III Full-Speed USB Controller
Features
■ Powerful Harvard-archi...
Description
CY7C64215
enCoRe™ III Full-Speed USB Controller
enCoRe™ III Full-Speed USB Controller
Features
■ Powerful Harvard-architecture processor ❐ M8C processor speeds up to 24 MHz ❐ Two 8 × 8 multiply, 32-bit accumulate ❐ 3.15 to 5.25-V operating voltage ❐ USB 2.0 USB-IF certified. TID# 40000110 ❐ Commercial operating temperature range: 0 °C to +70 °C ❐ Industrial operating temperature range: –40 °C to +85 °C
■ Advanced peripherals (enCoRe™ III blocks) ❐ Six analog enCoRe III blocks provide: Up to 14-bit incremental and delta sigma analog-to-digital converters (ADCs) ❐ Programmable threshold comparator ❐ Four digital enCoRe III blocks provide: 8-bit and 16-bit pulse width modulators (PWMs), timers, and counters I2C master SPI master or slave Full-duplex universal asynchronous receiver-transmitter (UART) CYFISNP modules to talk to Cypress CYFI™ radio
■ Complex peripherals by combining blocks
■ Full-speed USB (12 Mbps) ❐ Four unidirectional endpoints ❐ One bidirectional control endpoint ❐ Dedicated 256-byte buffer ❐ No external crystal required ❐ Operational at 3.15 V to 3.5 V or 4.35 V to 5.25 V
■ Flexible on-chip memory ❐ 16 KB flash program storage 50,000 erase/write cycles ❐ 1 KB SRAM data storage ❐ In-system serial programming (ISSP) ❐ Partial flash updates ❐ Flexible protection modes ❐ EEPROM emulation in flash
■ Programmable pin configurations ❐ 25 mA sink on all general purpose I/Os (GPIOs) ❐ Pull-up, Pull-down, high Z, strong, or open drain drive modes on all GPI...
Similar Datasheet