S25FS256S

S25FS128S S25FS256S 1.8 V, Serial Peripheral Interface with Multi-I/O, MirrorBit® Non-Volatile Flash Features  Density – S25FS128S-128 Mbits (16 Mbytes) – S25FS256S-256 Mbits (32 Mbytes)  Serial Peripheral Interface (SPI) – SPI Clock polarity and phase modes 0 and 3 – Double Data Rate (DDR) option – Extended Addressing: 24- or 32-bit address options – Serial Command subset and footprint compatible with S25FL-A, S25FL-K, S25FL-P, and S25FL-S SPI families – Multi I/O Command subset and footprint compatible with S25FL-P, and S25FL-S SPI families  Read – Commands: Normal, Fast, Dual I/O, Quad I/O, DDR Quad I/O – Modes: Burst Wrap, Continuous (XIP), QPI – Serial Flash Discoverable Parameters (SFDP) and Common Flash Interface (CFI), for configuration information  Program – 256- or 512-byte Page Programming buffer – Program suspend and resume  Erase – Hybrid sector option – Physical set of eight 4-kbyte sectors and one 32-kbyte sector at the top or bottom of address space with all remaining sectors of 64 kbytes – Uniform sector option – Uniform 64-kbyte or 256-kbyte blocks for software compatibility with higher density and future devices – Erase suspend and resume – Erase status evaluation – 100,000 Program-Erase Cycles on any sector, minimum – 20 Year Data Retention, typical  Security Features – One-Time Program (OTP) array of 1024 bytes – Block Protection: – Status Register bits to control protection against program or erase of a contiguous range of sectors – Hardware and...