Document
PPJU5NA80 / PJD5NA80 / PJP5NA80 / PJF5NA80
800V N-Channel MOSFET
Voltage
800 V Current
5A
Features
RDS(ON), VGS@10V,ID@ 2.5A<2.7Ω High switching speed Improved dv/dt capability Low Gate Charge Low reverse transfer capacitance Lead free in compliance with EU RoHS 2011/65/EU directive. Green molding compound as per IEC61249 Std.
(Halogen Free)
Mechanical Data
Case: TO-251AA,TO-252AA ,TO-220AB, ITO-220AB-F Package Terminals : Solderable per MIL-STD-750, Method 2026 TO-251AA Approx. Weight : 0.0104 ounces, 0.297grams TO-252AA Approx. Weight : 0.0104 ounces, 0.297grams TO-220AB Approx. Weight : 0.067 ounces, 2 grams ITO-220AB-F Approx. Weight : 0.068 ounces, 2 grams
ITO-220AB-F
TO-220AB
TO-252AA
TO-251AA
Maximum
Ratings
and
Thermal
Characteristics
o
(TA=25 C
unless
otherwise
noted)
PARAMETER
SYMBOL TO-251AA
Drain-Source Voltage
Gate-Source Voltage
Continuous Drain Current
Pulsed Drain Current
Single Pulse Avalanche Energy (Note 1)
Power Dissipation
TC=25oC Derate above 25oC
Operating Junction and
Storage Temperature Range
Typical Thermal resistance
- Junction to Case
- Junction to Ambient
VDS VGS ID IDM EAS PD
TJ,TSTG
RθJC RθJA
140 1.12
0.89 110
TO-220AB ITO-220AB-F TO-252AA UNITS
800
+30
5
20
323
146 48
1.17
0.38
140 1.12
V V A A mJ W W/ oC
-55~150
oC
0.86
2.6
0.89
oC/W
62.5 120 110
Limited only By Maximum Junction Temperature
March 10,2014-REV.00
Page 1
PPJU5NA80 / PJD5NA80 / PJP5NA80 / PJF5NA80
Electrical
Characteristics
o
(TA=25 C
unless
otherwise
noted)
PARAMETER
SYMBOL TEST CONDITION
Static
Drain-Source Breakdown Voltage Gate Threshold Voltage Drain-Source On-State Resistance Zero Gate Voltage Drain Current Gate-Source Leakage Current Diode Forward Voltage Dynamic (Note 4)
BVDSS VGS(th) RDS(on) IDSS IGSS
VSD
VGS=0V,ID=250uA VDS=VGS,ID=250uA VGS=10V,ID=2.5A VDS=800V,VGS=0V VGS=+30V,VDS=0V IS=5A,VGS=0V
Total Gate Charge Gate-Source Charge Gate-Drain Charge Input Capacitance Output Capacitance Reverse Transfer Capacitance
Qg Qgs Qgd Ciss Coss Crss
VDS=640V, ID=5A, VGS=10V (Note 2,3)
VDS=25V, VGS=0V, f=1.0MHZ
Turn-On Delay Time Turn-On Rise Time Turn-Off Delay Time Turn-Off Fall Time Drain-Source Diode
td(on) tr
td(off) tf
VDD=400V, ID=5A, RG=25Ω
(Note 2,3)
Maximum Continuous Drain-Source Diode Forward Current
IS
---
Maximum Pulsed Drain-Source Diode Forward Current
ISM
---
Reverse Recovery Time Reverse Recovery Charge
trr VGS=0V, IS=5A Qrr dIF/ dt=100A/us (Note 2)
NOTES : 1. L=30mH, IAS=4.6A, VDD=50V, RG=25 ohm, Starting TJ=25oC
2. Pulse width<300us, Duty cycle<2%
3. Essentially independent of operating temperature typical characteristics.
4. Guaranteed by design, not subject to production testing
MIN. TYP. MAX. UNITS
800 - - V
234V - 2.2 2.7 Ω
- 0.01 1
uA
- +10 +100 nA
- 0.89 1.4 V
- 17 - 4.6 - 7.4 - 660 - 78 - 2.8 - 12 - 28 - 31 - 27 -
nC pF ns
- - 5A
- - 20 A
- 550 -3-
ns uC
March 10,2014-REV.00
Page 2
PPJU5NA80 / PJD5NA80 / PJP5NA80 / PJF5NA80
TYPICAL CHARACTERISTIC CURVES
Fig.1 Output Characteristics
Fig.2 Transfer Characteristics
Fig.3 On-Resistance vs. Drain Current
Fig.4 On-Resistsnce vs. Junction temperature
Fig.5 Capacitance vs. Drain-Source Voltage
March 10,2014-REV.00
Fig.6 Body Dlode Characterlslcs
Page 3
PPJU5NA80 / PJD5NA80 / PJP5NA80 / PJF5NA80
TYPICAL CHARACTERISTIC CURVES
Fig.7 Gate-Charge Characteristics
Fig.8 Breakdown Voltage Variation vs.Temperature
Fig.9 Threshold Voltage Variation with Temperature
Fig.10 Maximum Safe Operating Area
Fig.11 Maximum Safe Operating Area
March 10,2014-REV.00
Fig.12 Maximum Safe Operating Area
Page 4
PPJU5NA80 / PJD5NA80 / PJP5NA80 / PJF5NA80
TYPICAL CHARACTERISTIC CURVES
Fig.13 PJU/PJD Normalized Transient Thermal Impedance vs. Pulse Width
Fig.14 PJP5NA80 Normalized Transient Thermal Impedance vs. Pulse Width
Fig.15 PJF5NA80 Normalized Transient Thermal Impedance vs. Pulse Width
March 10,2014-REV.00
Page 5
PPJU5NA80 / PJD5NA80 / PJP5NA80 / PJF5NA80
Packaging Information
.
ITO-220AB-F Dimension
Unit: mm
TO-220AB Dimension
Unit: mm
TO-252AA Dimension
Unit: mm
TO-251AA Dimension
Unit: mm
March 10,2014-REV.00
Page 6
PPJU5NA80 / PJD5NA80 / PJP5NA80 / PJF5NA80
PART NO PACKING CODE VERSION
Part No Packing Code PJU5NA80_T0_00001 PJD5NA80_L2_00001 PJP5NA80_T0_00001 PJF5NA80_T0_00001
Package Type TO-251AA TO-252AA TO-220AB
ITO-220AB-F
Packing type 80pcs / Tube 3,000pcs / 13” reel 50pcs / Tube 50pcs / Tube
Marking U5NA80 D5NA80 P5NA80 F5NA80
Version Halogen free Halogen free Halogen free Halogen free
March 10,2014-REV.00
Page 7
PPJU5NA80 / PJD5NA80 / PJP5NA80 / PJF5NA80
Disclaimer
● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc..
● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document.
● Panjit International.