A1021

A1021 / SMA1021 Cascadable Amplifier 10 to 1000 MHz Features Product Image Rev. V3 Description The A1021 RF amplifier is a discrete hybrid design, which uses thin film manufacturing processes for consistent performance and high reliability. This 2 stage bipolar transistor feedback amplifier design displays impressive performance over a broadband frequency range. An active DC biasing network insures temperature-stable performance. Both TO-8 and Surface Mount packages are hermetically sealed, and MIL-STD-883 environmental screening is available. Ordering Information Part Number A1021 SMA1021 CA1021 ** Package TO-8 Surface Mount SMA Connectorized ** The connectorized version is not RoHs compliant. Electrical Specifications: Z0 = 50, VCC = +5 VDC Absolute Maximum Ratings Parameter Frequency Small Signal Gain (min) Gain Flatness (max) Reverse Isolation Noise Figure (max) Power Output @ 1 dB comp. (min) IP3 IP2 Units MHz dB dB dB dB dBm dBm dBm Typical 25ºC 5-1000 26.0 ±0.5 35 3.8 14.5 +26 +50 Guaranteed 0º to 50ºC -54º to +85ºC* 10-1000 10-1000 25.0 24.0 ±0.7 ±0.9 4.5 14.0 5.0 13.0 Parameter Absolute Maximum Storage Temperature -62ºC to +150ºC Case Temperature 125ºC DC Voltage +8 V Continuous Input Power +10 dBm Short Term Input power (1 minute max.) 50 mW Peak Power (3 µsec max.) 0.5 W “S” Series Burn-In Temperature (case) 125ºC Thermal Data: VCC = +5 VDC Parameter Rating Second Order Harmonic IP VSWR Input / Output (max) DC Current @ 5 Volt...