Precision 1-7 Clock Buffer
PI6C185-0011122233344455566677788899900011122233344455566677788899900011122233344455566677788899900011122211122233344455...
Description
PI6C185-00111222333444555666777888999000111222333444555666777888999000111222333444555666777888999000111222111222333444555666777888999000111222333444555666777888999000111222333444555666777888999000111222111222333444555666777888999000111222333444555666777888999000111222333444555666777888999000111222111222333444555666777888999000111222333444555666777888999000111222333444555666777888999000111222111222333444555666777888999000111222
Precision 1-7 Clock Buffer
Product Features
High-speed, low-noise non-inverting 1-7 buffer Switching speed up to 140 MHz (PI6C185-00A)* Supports up to three mobile SDRAM DIMMs Low skew (<250ps) between any two output clocks I2C Serial Configuration interface Multiple VDD, VSS pins for noise reduction 3.3V power supply voltage 20-pin TSSOP (L) and QSOP (Q) packages
* Maximum Operating Frequencies: PI6C185-00 = 125 MHz; PI6C185-00A = 140 MHz.
Block Diagram
Description
The PI6C185-00 is a high-speed low-noise 1-7 non-inverting buffer designed for SDRAM clock buffer applications. This buffer is intended to be used with the PI6C10X clock generator for Intel Architecture-based Mobile systems. At power up all SDRAM output are enabled and active. The I2C Serial control may be used to individually activate/deactivate any of the 7 output drivers. Note: Purchase of I2C components from Pericom conveys a license to use them in an I2C system as defined by Philips.
Pin Configuration
BUF_IN
SDATA SCLOCK
I2C I/O
SDRAM0 SDRAM1 SDRAM2 SDRAM3
SDRAM6
...
Similar Datasheet