PI4GTL2002

PI4GTL2002 ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| 2-bit bidirectional low voltage translator Features  2-bit bidirectional translator  Less than 1.5 ns maximum propagation delay to accommodate Standard mode and Fast mode I2C- bus devices and multiple masters  Allows voltage level translation between 0.8V, 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V and 5 V buses, which allows direct interface with GTL, GTL+, LVTTL/TTL and 5 V CMOS levels  Provides bidirectional voltage translation with no direction pin  Low 3.5 ohm -state connection between input and output ports provides less signal distortion  Supports hot insertion  5 V tolerant inputs  Flow through pin out for ease of printed-circuit board trace routing  ESD protection exceeds 4KV HBM per JESD22- A114  Package: UQFN1.6*1.6-8L, MSOP-8L,SOIC-8L Description The Gunning Transceiver Logic - Transceiver Voltage Clamps (GTL-TVC) provide high-speed voltage translation with low ON-state resistance and minimal propagation delay. The GTL2002 provides 2 NMOS pass transistors (Sn and Dn) with a common gate (GREF) and a reference transistor (SREF and DREF). The device allows bidirectional voltage translations between 0.8 V and 5.0 V witho...