4-Bit Bi-directional Level Shifter
PI4ULS3V204 4-Bit Bi-directional Level Shifter for Open-drain and Push-pull Application
||||||||||||||||||||||||||||||||...
Description
PI4ULS3V204 4-Bit Bi-directional Level Shifter for Open-drain and Push-pull Application
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Features
VCCA can be Less than, Greater than or Equal to
VCCB 1.1V to 3.6V on A Port and 1.1V to 3.6V on B
Port High-Speed with 24 Mb/s Data Rate for push-pull
application High-Speed with 2 Mb/s Data Rate for open-drain
application No Direction-Control Signal Needed Low Bit-to-Bit Skew Non-preferential Power-up Sequencing ESD protection exceeds 8000V HBM per
JESD22-A114 Integrated 10 kΩ Pull-up Resistors Package: TSSOP-14,TQFN3.5x3.5-14,CSP-12
Description
The PI4ULS3V204 is a 4-bit configurable dual supply bidirectional auto sensing translator that does not require a directional control pin. The A and B ports are designed to track two different power supply rails, VCCA and VCCB respectively. Both the VCCA and VCCB supply rails are configurable from 1.1V to 3.6V. This allows voltage logic signals on the VCCA side to be translated into lower, higher or equal value voltage logic signals on the VCCB side, and vice-versa.
The translator has integrated 10 kΩ pull-up resistors on the I/O lines. The integrated pull-up resistors are used to pull-up the I/...
Similar Datasheet