Tantalum Chip Capacitors
NTC-T Series
FEATURES
• MOLDED CONSTRUCTION FOR HIGH SOLDERING HEAT RESISTANCE
• SEVEN CASE SIZES (P, A, B, C, V, D AND E)
• BOTH FLOW AND REFLOW SOLDERING APPLICABLE • TAPE & REEL PACKAGING COMPATIBLE WITH AUTOMATIC
PICK & PLACE EQUIPMENT
RoHS Compliant
includes all homogeneous materials
SPECIFICATIONS & PERFORMANCE CHARACTERISTICS
*See Part Number System for Details
Capacitance Range
Capacitance Tolerance
Rated Voltage Range @ 85°C (Vdc)
Surge Voltage Rating @ 85°C (Vdc)
Derated Voltage @ 125°C (Vdc) Operating Temperature Range
Dissipation Factor Leakage Current @ +25°C (After 5 Minutes at Rated Voltage)
Capacitance Change With Temperature
A2, A, B2, B, C, D & E Case Size J & P Case Size
Resistance to Soldering Heat (+260°C for 5 Seconds) Moisture Resistance
(500 hours; 90~95% RH @ 40°C) Temperature Cycling
(5 cycles; -55°C ~ +125°C) Load Life (at Rated Voltage)
(2,000 hours @ 85°C) Base Failure Rate (1.0Ω/Volt)
0.1µF to 470µF ±10% (K), ±20% (M) 2.5 4.0 6.3 10 16 20 25 35 50 3.3 5.2 8.0 13 20 28 33 46 85 1.8 2.5 4.0 6.3 10 13 16 22 32 -55°C to +125°C (voltage derating at temperatures over +85°C as referenced above) See Case Size and Specifications Table
Not More Than 0.01CV or 0.5µA, whichever is greater
-55°C
+85°C
+125°C
∆C - 12%
∆C ± 12%
∆C ± 12%
∆C - 20%
∆C ± 20%
∆C ± 20%
∆C ± 5%* Max, LC = Less than initial specification.
DF = Less than initial specification
∆C ± 5%* Max, LC = Less than initial specification.
DF = 150% of initial specification
∆C ± 5%* Max, LC = Less than initial specification. DF = Less than initial specification
∆C ± 10%* Max, LC = 125% of initial specification. DF = Less than initial specification
1%/1000 hours at 60% confidence level (+85°C)
*±12% ~ ±15% for extended values, ±20% for P case size values
RIPPLE CURRENT CORRECTION FACTOR:
Ambient Temperature
25°C +55°C +85°C +105°C +125°C
Correction Factor 1.0 0.90 0.80 0.40 0.15
RIPPLE CURRENT/VOLTAGE RATINGS:
Tmax. = Pd
V max. = Z •
ESR
Tmax. = Ripple Current rating (Arms)
Pd ESR
POWER DISSIPATION @ 25°C (FREE AIR) & EQUIVALENT SERIES INDUCTANCE (ESL)
Case Pd Max. ESL Code (W) (nH)
P 0.025 1.00 A 0.070 1.20 B 0.080 1.50 C 0.110 2.70 V 0.125 D 0.150 3.00 E 0.165 3.00
Pd = Power dissipation (watt) ESR = Equivalent series resistance (ohm) V max. = Ripple voltage rating (Vrms) Z = The capacitors impedance (ohm) = (ESR)2+(XL-XC)2
PART NUMBER SYSTEM NTC-T 106 M 16 TR B F
RoHS Compliant Case Code Packaging: TR=Tape/Reel Voltage Tolerance Code: K=±10%, M=± 20% Capacitance Code Series
PRECAUTIONS
Please review the notes on correct use, safety and precautions found on our
website at www.niccomp.com/tantpc If in doubt or uncertainty, please review your specific application - process
details with NIC’s technical support personnel:
[email protected]
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 1 SPECIFICATIONS ARE SUBJECT TO CHANGE
Tantalum Chip Capacitors
NTC-T Series
.