KBP201-KBP207
Single Phase 2.0AMP. Silicon Bridge Rectifiers
Voltage Range 50 to 1000 Volts
Current 2.0 Amperes
KBP
Features
Glass passivated junction Ideal for printed circuit board Reliable low cost construction technique results in inexpensive product High temperature soldering guaranteed: 260 ℃ / 10 seconds at 5 lbs. ( 2.3 Kg ) tension Small size, simple installation
.460(11.68) .420(10.6)
.035(0.9) .028(0.7)
AC
.5 (12.7) MIN
.160(4.1) .140(3.6)
SPACING
.600(15.50) .560(14.00)
.153(3.9) .146(3.2)
.050(1.27)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol KBP KBP KBP KBP KBP KBP KBP Units
201 202 203 204 205 206 207
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current @TA = 50℃
Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method )
VDC I(AV)
IFSM
50 100 200 400 600 800 1000 V 2.0 A
60 A
Maximum Instantaneous Forward Voltage @ 2.0A
VF
1.2
V
Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=125℃
IR
10 uA 500 uA
Typical Thermal Resistance (Note)
RθJA RθJL
25 8
℃/W
Operating Temperature Range
TJ
-55 to +125
℃
Storage Temperature Range
TSTG
-55 to +150
℃
Note: Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B.
With 0.47 x 0.47” (12 x 12mm) Copper Pads.
http://www.luguang.cn
mail:
[email protected]
PEAK FORWARD SURGE CURRENT. (A)
KBP201-KBP207
Single Phase 2.0AMP. Silicon Bridge Rectifiers
RATINGS AND CHARACTERISTIC CURVES (KBP201 THRU KBP207)
AVERAGE FORWARD CURRENT. (A)
FIG.1- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT
60
50
40
30
20
10
FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE
2.0
1.5
1.0
0.5
0
1
2
46
10
20
40 60 100
NUMBER OF CYCLES AT 60Hz
FIG.3- TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS PER BRIDGE ELEMENT
10
0 20 40 60 80 100 120 140 150 AMBIENT TEMPERATURE. (oC)
FIG.4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT
100
TJ=1250C
1 10
INSTANTANEOUS REVERSE CURRENT. ( A)
0.1
0.01 0.6
Tj=250C PULSE WIDTH-300 S 1% DUTY CYCLE
0.7 0.8 0.9 1.0 1.1 1.2 1.3
INSTANTANEOUS FORWARD VOLTAGE. (V)
1.4
1 TJ=250C
0.1
0
20 40
60
80 100 120
PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)
140
INSTANTANEOUS FORWARD CURRENT. (A)
http://www.luguang.cn
mail:
[email protected]
.