HDMI 1.4b 1:2 Splitter/Demux
PI3HDX412BD
HDMI 1.4b 1:2 Splitter/Demux for 3.4Gbps Data Rate with Equalization & Pre-emphasis
Features
General Descr...
Description
PI3HDX412BD
HDMI 1.4b 1:2 Splitter/Demux for 3.4Gbps Data Rate with Equalization & Pre-emphasis
Features
General Description
yySupport up to 3.4Gbps TMDS Serial Link Compliant with HDMI 1.4b requirement
yyHDMI 1-to-2 Splitter or 1-to-2 DeMux with Equalization & Pre-emphasis up to 340 MHz Clock
yyAC or DC Coupled Differential Signaling Input
yyConfigurable TMDS Output Signal with Port Selection, Pre-emphasis, Voltage Swing, Slew Rate Control
yySupport Squelch Mode with Built-in Clock detector yyControl Status Register controlled by Pin strap or I2C
mode programming
yyESD Protection on I/O pins to connector: 8KV Contact per IEC6100-4-2 and 2KV HBM
yySupply Voltage: 3.3V yyIndustrial Temperature Range: -40oC to 85oC
yyPackaging (Pb-free & Green): 56-contact TQFN (ZB56)
Pericom Semiconductor’s PI3HDX412BD, active-drive switch solution is targeted for high-resolution video networks that are based on HDMITM/DVI standards, and TMDS signal processing.
The PI3HDX412BD is an active single TMDS channel to two TMDS channel Splitter and DeMux with Hi-Z outputs. The device drives differential signals to multiple video display units.
It provides controllable output swing levels that can be controlled through pin control or I2C control, depending on the mode select pin. This solution also provides a unique advanced pre-emphasis technique to increase rise and fall times. The maximum HDMITM/DVI data rate of 3.4Gbps provides a 1920x1080 @60Hz resolution or 4K @30Hz required for 4K HDTV and ...
Similar Datasheet