PI3VDP411LS

PI3VDP411LS Digital Video Level Shifter from AC Coupled Digital Video Input to a DVI/HDMI™ Transmitter Features Description ÎÎConverts low-swing AC coupled differential input to HDMI™ rev 1.3 compliant open-drain current steering Rx terminated differential output ÎÎHDMI level shifting operation up to 2.5Gbps per lane (250MHz pixel clock) ÎÎIntegrated 50-ohm termination resistors for AC-coupled differential inputs. Pericom Semiconductor’s PI3VDP411LS provides the ability to use a Dual-mode DP transmitter in HDMI™ mode. This flexibility provides the user a choice of how to connect to their favorite display. All sinal paths accept AC coupled video signals. The PI3VDP411LS converts this AC coupled signal into an HDMI rev 1.3 compliant signal with proper signal swing. This conversion is automatic and transparent to the user. ÎÎEnable/Disable feature to turn off TMDS outputs to enter low-power state. The PI3VDP411LS supports up to 2.5Gbps, which provides 12- bits of color depth per channel, as indicated in HDMI rev 1.3. ÎÎOutput slew rate control on TMDS outputs to minimize EMI. ÎÎTransparent operation: no re-timing or configuration required. ÎÎ3.3 Power supply required. Pin Configuration 48-Pin TQFN (ZDE/ZBE) GND EQ_1 EQ_0 VDD DDC_EN GND HPD_SINK SDA_SINK SCL_SINK GND VDD OE# ÎÎIntegrated ESD protection to 8kV contact on all high speed I/O pins (IN_x and OUT_x) per IEC61000-4-2 test spec, level 4 ÎÎDDC level shifters from 5V from sink side down to 3.3V on source side...