APW7037A/B
8-PIN Synchronous Buck PWM Controller
Features
General Description
• Operating with Single 5V or 12V Inpu...
APW7037A/B
8-PIN Synchronous Buck PWM Controller
Features
General Description
Operating with Single 5V or 12V Input Drives N-Channel MOSFETs Simple Single-Loop Control Design
- Voltage-Mode PWM Control - Full 0% to 100% Duty Ratio
- Fast Transient Response
±2% Output Voltage Accuracy Over Temperature Under-Voltage Protection for Output 200/400kHz Constant Frequency Operation
- 200kHz for APW7037B
- 400kHz for APW7037A
Small size, 8-PIN Package (SOIC or TSSOP) Lead Free and Green Devices Available
(RoHS Compliant)
The APW7037 series are designed to provide a low cost synchronous Buck
regulator for on-board DC to DC converter applications. The APW7037 series together with dual N-channel MOSFETs such as APM7313, provide a low cost solution for such applications. Each device features an internal 200/400kHz oscillator, Power-On-Reset (POR) for both VCC and VC supplies, an external programmable soft-start function as well as output undervoltage detection that latches off the device when an output short is detected.
Pin Configuration
Applications
Graphics Cards DDR Memory Power Supply DDR Memory Termination Voltage Low-Voltage Distributed Power Supplies
FB
1
VCC
2
LDRV
3
GND
4
8
SS
7
COMP
6
VC
5
HDRV
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders.
Copyright © ANPEC Electronics C...