Document
GP1601 thru GP1607
®
GP1601 thru GP1607
Pb Free Plating Product
Pb
16.0 Ampere Dual Common Cathode General Purpose Rectifier Diodes
Features Glass passivated chip junction Low forward voltage drop High current capability Low reverse leakage current High surge current capability
Application
Automotive Inverters/Solar Inverters Plating Power Supply,SMPS and UPS Car Audio Amplifiers and Sound Device Systems
Mechanical Data Case: Heatsink TO-220AB Epoxy: UL 94V-0 rate flame retardant Terminals: Solderable per MIL-STD-202 method 208 Polarity: As marked on diode body Mounting position: Any Weight: 2.1 gram approxiamtely
TO-220AB
.419(10.66) .387(9.85)
.139(3.55) MIN
Unit : inch (mm)
.196(5.00) .163(4.16)
.054(1.39) .045(1.15)
.269(6.85) .226(5.75) .624(15.87) .548(13.93)
.177(4.5)MAX .50(12.7)MIN
.038(0.96) .019(0.50)
.1(2.54)
.1(2.54)
.025(0.65)MAX
Case
Positive Common Cathode
Case
Negative Common Anode
Suffix "A"
Case
Doubler Tandem Polarity
Suffix "D"
Maximum Ratings and Electrical Characteristics
Rating at 25 oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol GP GP GP GP GP GP GP Units
1601 1602 1603 1604 1605 1606 1607
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
VDC 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified
Current .375”(9.5mm) Lead Length @TC = 100 oC
I(AV)
16.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
IFSM
150
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage @8.0A Maximum DC Reverse Current @ TC=25 oC at Rated DC Blocking Voltage @ TC=125 oC
Typical Junction Capacitance ( Note 1)
VF
IR
Cj
Typical Thermal Resistance (Note 2)
RθJC
Operating and Storage Temperature Range TJ ,TSTG
1.1
10 250 50 1.5 - 65 to + 150
V
uA uA pF oC/W oC
Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C.
2. Thermal Resistance from Junction to Case Mounted on Heatsink size 2” x 3” x 0.25” Al-Plate.
Rev.04/2014 © 2006 Thinki Semiconductor Co.,Ltd.
Page 1/2 http://www.thinkisemi.com/
GP1601 thru GP1607
®
AVERAGE FORWARD CURRENT. (A)
PEAK FORWARD SURGE CURRENT. (A)
RATINGS AND CHARACTERISTIC CURVES (GP1601 THRU GP1607)
FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE
18
16
14
12 Single Phase Half Wave 60Hz Resistive of
10 Inductive Load
8
0
50 100
150
CASE TEMPERATURE. (oC)
FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT
175
150
8.3ms Single Half Sine Wave JEDEC Method
125
100
45
50
25
0 12
5 10
20
50 100
NUMBER OF CYCLES AT 60Hz
FIG.4- TYPICAL JUNCTION CAPACITANCE
120
100
80 60 Tj=250C
40
20
0 1
5 10
50 100
REVERSE VOLTAGE. (V)
500 1000
INSTANTANEOUS FORWARD CURRENT. (A)
INSTANTANEOUS REVERSE CURRENT. ( A)
FIG.2- TYPICAL REVERSE CHARACTERISTICS
100
40
10 Tj=1250C
4 2 1.0
0.4 Tj=250C 0.2
0.1 0
20
40 60 80 100 120 140
PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)
FIG.5- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
400
200
100
40 20 10
4 2
1 Tj=25oC Pulse Width=300 s 1% Duty Cycle
0.4
0.2
0.1 0.6 0.8 1.0 1.2 1.4 1.6 FORWARD VOLTAGE. (V)
1.8 2.0
JUNCTION CAPACITANCE.(pF)
Rev.04/2014 © 2006 Thinki Semiconductor Co.,Ltd.
Page 2/2 http://www.thinkisemi.com/
.