Document
ComPAC
Product Highlights
™
DC-DC Switchers 50 to 600W 1-3 Outputs
ComPAC delivers up to 600W from one, two, or three outputs in a package just 0.99” (25,2mm) in height with the field proven performance, high efficiency and high reliability inherent in Vicor’s component level power converters. ComPAC meets British Telecom and European norms for input surge withstand and meets conducted emissions of EN55022 Class B. ComPAC is offered with input voltage ranges optimized for industrial and telecommunication applications and provides extended input overvoltage capability, input reverse polarity protection, undervoltage lockout, and master disable.
Features
➤ Inputs 24, 48, and 300Vdc ➤ Any output: 1 to 95Vdc ➤ Input surge withstand: British Telecom BTR 2511, EN-61000-4-5 ➤ Meets British Telecom BTR 2511, EN55022 Class B conducted emissions ➤ UL, CSA, TÜV (IEC 950) ➤ CE marked ➤ 80-90% efficiency ➤ Up to 10W/cubic inch ➤ Reverse polarity protected ➤ Master disable ➤ Overvoltage shutdown
ComPAC Configuration Chart
Total Power Single Outputs: 50-200W 100-400W 300-600W VI-LC VI-MC VI-NC VI-PC VI-QC VI-RC Part No. – – – – – – Dimensions 8.6" x 2.5" x 0.99" (218,4 x 63,5 x 25,2mm) 8.6" x 4.9" x 0.99" (218,4 x 124,5 x 25,2mm) 8.6" x 7.3" x 0.99" (218,4 x 185,4 x 25,2mm) 8.6" x 4.9" x 0.99" (218,4 x 124,5 x 25,2mm) 8.6" x 7.3" x 0.99" (218,4 x 185,4 x 25,2mm) 8.6" x 7.3" x 0.99" (218,4 x 185,4 x 25,2mm)
Use the configuration chart at the right to define your Vicor part number(s).
Dual Outputs:
100-400W 150-600W
Conduction Cooled Models Available
Add "-CC" to the end of the part number.
(Consult factory for details.)
Triple Outputs: 150-600W
Input Voltage Nominal Range
1 = W= 3 = N = 6 = 24V 24V 48V 48V 300V 21 - 32V (1) 18 - 36V (1) 42 - 60V (2) 36 - 76V (2) 200 - 400V (2)
Output Voltage
Z 2V Y 3.3V 0 5V X 5.2V W 5.5V V 5.8V T 6.5V R 7.5V M 10V 1 12V P 13.8V 2 15V N 18.5V 3 24V L 28V J 36V K 40V 4 48V H 52V F 72V D 85V B 95V E C I M = = = =
Product Grade
-10°C to +85°C -25°C to +85°C -40°C to +85°C -55°C to +85°C
Output Power/Current
Vout ≥ 5V Y = 50W X = 75W W = 100W V = 150W U = 200W Vout < 5V 10A 15A 20A 30A 40A
Output Power/Current
Vout ≥ 5V W = 100W V = 150W U = 200W S = 300W Q = 400W Vout < 5V 20A 30A 40A 60A 80A
Output Power/Current
Vout ≥ 5V S = 300W P = 450W M = 600W Vout < 5V 60A 90A 120A
Max output for (1) (2)
≥5V Outputs 150W 200W
<5V Outputs 30A 40A
Long Term Safe Operating Area Curves (1% duty cycle max. Zs=0.5Ω; for short duration transient capability refer to page 3.)
48V Input
Standard
24V Inputs
Wide Range
48V Wide Range Input 276V
300V Input
160V 100V 60V 42V 0.1 I.S.W. Full Load
R.E.
100V
R.E.
100V
R.E.
800V I.S.W. Full Load
R.E.
I.S.W. Full Load
S.D.
36V
125V 76V
S.D.
I.S.W. Full Load
S.D.
100V
500V 400V
S.D.
32V Normal Operating Area 21V 0.1
Normal Operating Area 1 10ms 100 1000
Normal Operating Area 18V 1000 36V 0.1 1 10ms 100 1000
500ms
S.D.
Normal Operating Area 200V 0.1 1 10ms 100 1000
500ms
1
10ms
100
I.S.W.: Input surge withstand, no degradation of performance. R.E.: Ratings Exceeded S.D.: Shutdown
ComPAC 10/02
1 of 4
ComPAC Specifications
(Typical at 25°C, nominal line and 75% load, unless otherwise specified)
PARAMETER Input Characteristics 24V 24V Wide 48V 48V Wide 300V No load power dissipation3 Master disable input current 3 (Absolute max., 20 mA) Quiescent Input current 3 logic disable Reverse polarity protection
MIN 21 18 42 36 200 1.35 4
E-GRADE TYP 24 24 48 48 300
MAX 32 36 60 76 400 2
MIN 21 18 42 36 200 1.35 4
C-, I-, M-GRADE TYP MAX 24 24 48 48 300 32 36 60 76 400 2
BROWNOUT* TRANSIENT** 18 n/a 36 n/a 170 36 n/a 72 n/a 425
UNITS Vdc Vdc Vdc Vdc Vdc Watts mA
NOTES See Fusing Information below See Fusing Information below See Fusing Information below See Fusing Information below See Fusing Information below Sink or source into disable optocoupler Current drawn from source when disabled No damage to unit with external fuse
7
10
7
10
mA
Output Characteristics (applies to each output individually) Setpoint accuracy Load/line regulation Load/line regulation Output temperature drift Long term drift Output ripple 2V, 3.3V 5V 10-48V Output voltage trimming1 50% Total remote sense compensation1 0.5 OVP set point Current limit 105% 2 Short circuit current 20% Thermal Characteristics Efficiency Shutdown temp. — case Operating temp. — case Isolation Characteristics Isolation Input to output Output to case Input to case Weight3 Fusing Information Input voltage LC series (200W) MC, PC series (400W) NC, QC, RC series (600W) Safety Agency Approvals UL, CSA, TÜV, VDE, IEC 950, CE Marked Environmental Characteristics/Product Grade Designators (Temperatures apply to product case.) E-Grade C-Grade I-Grade Storage temperature -20°C to +100°C -40°C to +100°C -55°C to +100°C Operating temperature -10°C to +85°C -25°C to +85°C -40°C to +85°C EMI / EMC Characteristics (Performed on selected samples representative of the ComPac product fam.