WH7016C

WH7016C Thermostat Product Manual Shenzhen Willhi Electronics Co., Ltd. Tel :0755 -29539385 Fax :86-0755 -2953 9395 Technical support: Engineer Tian Installation opening size: Wiring diagram Option switch Load Terminals 1 and 2: Normally opened contact of relay Terminals 3 and 4: Connect the power 12V Terminals 5 and 6: The factory parameter settings of thermostat can be locked after a short circuit, the user can not modify. Terminals 7 and 8: Temperature connection sensor Note: The load refers to the heating or cooling equipment on control. Electrical performance: Temperature measurement range: -50 ~ 110 Temperature control range: -50 ~ 110 Temperature measurement error: ± 0.5 Sensor Type: NTC (10K/3435) Control accuracy: 1 Working voltage: AC/DC12V Working current: <2W Relay contact point current: AC 7A/220V Data storage : Yes Working temperature: 0 ~ 50 Storage temperature: -10 ~ 60 Key Instructions: 1. RST: Press RST key to switch on and off, press the RST key on the power-off state once to turn on, on the power-on state, press the RST key for three seconds and hold on, then it will be off. 2. SET: A: Press the SET key once to enter the temperature control setting, press ▲ or ▼ button to adjust, press ▲ or ▼ button for three seconds and hold to enter the fast adjusting mode, press the SET key again to exit setting mode. B: Press and hold SET key for three seconds to enter the system menu settings, press the ▲ or ▼ key to select the adjustment menu, press SET key onc...