Smart Multi-DIMM Selector
FEATURES
• SMBus, version 1.0, compliant • Intel PAS Protected Storage support • Support Pentium and x86-based designs •...
Description
FEATURES
SMBus, version 1.0, compliant Intel PAS Protected Storage support Support Pentium and x86-based designs Support SMBus Q-Buffering via PWRGD Support SMBus selector for dual/triple DIMMs 32KHZ input clock or Crystal input Support 2 different power planes 10 bytes scratch pad registers 20 possible edge-sensitive programmable GPIOs
per device
8 possible Open Drain, Open Collector outputs Programmable addresses for cascaded OZ998s Supports 3.3V or 5V operation Supports 5V tolerant LVTTL inputs (OZ998B) LOW power hardware-driven speaker alarm
outputs
SMBALERT# and SMI event outputs 8 programmable interrupt inputs for SMI event or
SMBALERT#
8 Auto LED Flash (ALF) programmable outputs
with 10% or 50% duty cycles
ORDERING INFORMATION
OZ998S - 28 pin SSOP
OZ998
Intelligent Manager
Smart Multi-DIMM Selector
GENERAL DESCRIPTION
O2Micro’s OZ998 Multi-DIMM Selector supports the switching between a primary SMBus and 3 other secondary SMBus. This function is particularly useful for DIMM devices and the support of Intel’s PAS (Preboot Authentication Service).
In addition, the OZ998 can be configured to support two different power planes with different sets of General Purpose Input/Output (GPIO) signals, which supplements and enhances the power management capability of the chipsets, commonly found in an ACPI (Advanced Configuration of Power Interface) subsystem.
Up to 20 possible GPIOs are available per device, and among those, GPIO[15:8] are program...
Similar Datasheet