Shielded Power Inductors
Document 692-1
Shielded PowerInductors– EPL3012
• Low profile shielded power inductors; 3 × 3 × 1.3 mm max. • Very lo...
Description
Document 692-1
Shielded PowerInductors– EPL3012
Low profile shielded power inductors; 3 × 3 × 1.3 mm max. Very low DCR, high SRF ratings, Isat ratings up to 2.0 A Designer’s Kit C437 contains 5 each of all values Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Environmental RoHS compliant, halogen free Terminations RoHS compliant tin-silver-copper (96.5/3/0.5) over tin over nickel over silver-platinum. Other terminations available at additional cost. Weight 38 – 42 mg Ambient temperature –40°C to +85°C with (40°C rise) Irms current. Maximum part temperature +125°C (ambient + temp rise). Derating. Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 2000/7″reel; 7500/13″ reel Plastic tape: 8 mm wide, 0.2 mm thick, 4 mm pocket spacing, 1.55 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf.
Part number1
Inductance2 ±20% (µH)
EPL3012-102ML_ EPL3012-152ML_ EPL3012-182ML_ EPL3012-222ML_ EPL3012-332ML_
1.0 1.5 1.8 2.2 3.3
EPL3012-472ML_ 4.7 EPL3012-103ML_ 10 E...
Similar Datasheet