EZ-BLE PRoC Module
CYBLE-022001-00
EZ-BLE™ Creator Module
EZ-BLE™ Creator Module
General Description
The Cypress CYBLE-022001-00 is a full...
Description
CYBLE-022001-00
EZ-BLE™ Creator Module
EZ-BLE™ Creator Module
General Description
The Cypress CYBLE-022001-00 is a fully certified and qualified module supporting Bluetooth® Low Energy (BLE) wireless communication. The CYBLE-022001-00 is a turnkey solution and includes onboard crystal oscillators, chip antenna, passive components, and Cypress PSoC 4 BLE. Refer to the PSoC 4 BLE datasheet for additional details on the capabilities of the PSoC 4 BLE device used on this module. The CYBLE-022001-00 supports a number of peripheral functions (ADC, timers, counters, PWM) and serial communication protocols (I2C, UART, SPI) through its programmable architecture. The CYBLE-022001-00 includes a royalty-free BLE stack compatible with Bluetooth 4.1 and provides up to 16 GPIOs in a small 10 × 10 × 1.80 mm package. The CYBLE-022001-00 is a complete solution and an ideal fit for applications requiring BLE wireless connectivity.
Module Description
■ Module size: 10.0 mm ×10.0 mm × 1.80 mm (with shield)
■ Bluetooth 4.1 single-mode module
■ Industrial temperature range: –40 °C to +85 °C
■ 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz
■ 128-KB flash memory, 16-KB SRAM memory
■ Watchdog timer with dedicated internal low-speed oscillator (ILO)
■ Two-pin SWD for programming
■ Up to 16 GPIOs configurable as open drain high/low, pull-up/pull-down, HI-Z analog, HI-Z digital, or strong output
■ Certified to FCC, CE MIC, KC, and ISED regulations ❐ FCC ID:...
Similar Datasheet