EZ-BLE PRoC Module
PRELIMINARY
CYBLE-212019-00
EZ-BLETM PRoCTM Module
General Description
The CYBLE-212019-00 is a Bluetooth Low Energy...
Description
PRELIMINARY
CYBLE-212019-00
EZ-BLETM PRoCTM Module
General Description
The CYBLE-212019-00 is a Bluetooth Low Energy (BLE) wireless module solution. The CYBLE-212019-00 is a turnkey solution and includes onboard crystal oscillators, trace antenna, passive components, and the Cypress PRoC™ BLE. Refer to the CYBL10XX7X datasheet for additional details on the capabilities of the PRoC BLE device used on this module. The CYBLE-212019-00 supports a number of peripheral functions (ADC, timers, counters, PWM) and serial communication protocols (I2C, UART, SPI) through its programmable architecture. The CYBLE-212019-00 includes a royalty-free BLE stack compatible with Bluetooth 4.1 and provides up to 23 GPIOs in a 14.52 × 19.20 × 2.00 mm package. The CYBLE-212019-00 is fully certified and qualified. The CYBLE-212019-00 is drop-in compatible with the CYBLE-012011-00 EZ-BLE PRoC Module. The CYBLE-212019-00 is a complete solution targeted at applications requiring cost optimized BLE wireless connectivity.
Module Description ■ Module size: 14.52 mm ×19.20 mm × 2.00 mm (with shield) ■ Castelated solder pad connections for ease-of-use ■ 256-KB flash memory, 32-KB SRAM memory ■ Up to 23 GPIOs configurable as open drain high/low,
pull-up/pull-down, HI-Z analog, HI-Z digital, or strong output ■ Bluetooth 4.1 single-mode module ■ Certified to FCC, IC, MIC, KC, and CE regulations ■ Industrial temperature range: –40 °C to +85 °C ■ 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit
mult...
Similar Datasheet