32-bit Microcontroller
S6E1A Series
32-bit Arm® Cortex®-M0+ FM0+ Microcontroller
The S6E1A Series is a series of highly integrated 32-bit micr...
Description
S6E1A Series
32-bit Arm® Cortex®-M0+ FM0+ Microcontroller
The S6E1A Series is a series of highly integrated 32-bit microcontrollers designed for embedded controllers aiming at low power consumption and low cost.
This series has the Arm Cortex-M0+ Processor with on-chip Flash memory and SRAM, and consists of peripheral functions such as various timers, ADCs and communication interfaces (UART, CSIO, I2C, LIN).
The products which are described in this data sheet are placed into TYPE1-M0+ product categories in "FM0+ Family PERIPHERAL MANUAL".
Features
32-bit Arm Cortex-M0+ Core
Processor version: r0p1 Maximum operating frequency: 40 MHz Nested Vectored Interrupt Controller (NVIC): 1 NMI
(non-maskable interrupt) and 32 peripheral interrupt with 4 selectable interrupt priority levels
24-bit System timer (Sys Tick): System timer for OS task
management
Bit Band operation
Compatible with Cortex-M3 bit band operation
On-Chip Memories
Flash memory
Up to 88 Kbyte Read cycle:0 wait-cycle Security function for code protection
SRAM
The on-chip SRAM of this series has one independent SRAM. SRAM: 6 Kbyte
CSIO
Full duplex double buffer Built-in dedicated baud rate generator Overrun error detection function Serial chip select function (ch.1 and ch.3 only) Data length: 5 to 16 bits
LIN
LIN protocol Rev.2.1 supported Full duplex double buffer Master/Slave mode supported LIN break field generation function (The length is variable
between 13 bits and 16 bits.) ...
Similar Datasheet