LPD5010-102MR

Document 820-1 Coupled Inductors LPD5010 ForFlyback,SEPIC,Zeta and other Applications 0.189 ±0.003 4,80 ±0,076 14 0.189 ±0.003 XXX X 4,80 ±0,076 23 Dot indicates pin 1 Dash number Internal code Recommended Land Pattern 0.035 ±0.004 0,9 ±0,1 0.138 3,50 0.090 2,30 45° typ 0.134 0.090 3,40 2,30 0.030 0,75 0.197 5,00 0.060 1,52 14 L1 L2 23 0.060 1,50 0.134 3,40 0.197 5,00 Dimensions are in inches mm The LPD5010 coupled miniature shielded inductors are mere 1 mm high and 5 mm square. They are ideal for use in a variety of circuits including flyback, multi-output buck, SEPIC and Zeta. These inductors provide high inductance, high efficiency and excellent current handling in a rugged, low cost part. They can also be used as two single inductors connected in series or parallel or as a common mode choke. + D L1 L2 C VIN C SW – Typical Flyback Converter + VOUT – L2 D C + VOUTAUX – ++ L1 VIN SW D C VOUT –– Typical Buck Converter with auxiliary output + VIN C L1 Q C1 L2 D C + VOUT –– Typical SEPIC schematic + VIN C – Q C1 L2 L1 D C Typical Zeta schematic + VOUT – Document 820-1  Revised 11/09/15 Document 820-2 Coupled Inductors for SEPIC Applications – LPD5010 Series   Inductance2   DCR max3   SRF typ4 cCooeuffpicliinegn t L eLatkyapg5e 10%   Isat (A)6      Irms (A) 20% 30% both one   Part number1 ±20% (µH) (Ohms) (MHz) typ (µH) drop drop drop   windings7   winding8 LPD5010-681MR_ LPD5010-102MR_ ...