Document
MOSPEC
KBP005/RS201 THRU KBP10/RS207
SINGLE-PHASE BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts
CURRENT
2.0 Ampere
FEATURES Low cost High forward surge current capability Ideal for printed circuit board High temperature soldering guaranteed: 260oc/10 second at 5 lbs. (2.3kg) tension
MECHANICAL DATA Case: Transfer molded plastic
Epoxy: UL94V-O rate flame retardant
Terminals Lead Solderable Per MIL-STD-202E method 208C Polarity As Marking on Body
Mounting Position: Any
Weight 0.069 ounce, 1.95 gram
MAXIMUM RATINGS AND ELECTRICAL CHARATERISTICS
* Rating at 25 ambient temperature unless otherwise specified
* Single phase,half wave. 60Hz, resistive or inductive load. * For capacitive load derate current by 20 %
Characteristic
Symbol KBP005 KBP01 KBP02 KBP04 KBP06 KBP08 KBP10 RS201 RS202 RS203 RS204 RS205 RS206 RS207
Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage
VRRM VRWM 50 100 200 400 600 800 1000
VR
Unit V
RMS Reverse Voltage
VR(RMS)
Average Rectifier Forward Current
(Note 1)
@ TA=50
Non-Repetitive Peak Surge Current 8.3 ms Single half sine-wave superimposed on rated load ( JEDEC Method)
Forward Voltage (per element) ( IF =2.0 Amp)
Peak Reverse Current ( Rated DC Voltage, TC = 25 ) ( Rated DC Voltage, TC = 100 )
Rating for Fusing( t<8.3 ms)
Typical Junction Capacitance per element (Note2)
IO(AV)
IFSM VFM
IR I2t CJ
Typical Thermal Resistance (note 3) Operating and Storage Temperature Range
Rθ jA TJ , Tstg
35
70 140 280 420 560 700
2.0 50 1.0
V A A V
10 0.5 10 20
28
-65 to +150
uA mA A2s
pF
k/W
Note: 1 Lead maintained at ambient temperature at a distance of 9.5 mm from the case. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 3. Thermal resistance junction to ambient, mounted on PC board with 12 mm2 copper pad.
KBP005/RS201 thru KBP10/RS207
FIG-1 FORWARD CURRENT DERATING CURVE
FIG-2 TYPICAL FORWARD CHARACTERISITICS
NSTANTANEOUS FORWARD CURRENT (Amp.)
AVERAGE FORWARD RECTIFIED CURRENT (Amp.)
Ambient Temperature P.C.B Mounting 0.47”×0.47” (12×12 mm) Copper Pads 0.375”(9.5mm) Lead Length
CASE TEMPERATURE ( )
FIG-3 PEAK FORWARD SURGE CURRENT
TJ=25OC Single Half Sine Wave (JEDEC Method)
TJ=25OC Pulse Width=300us 1% Duty Cycle
FORWARD VOLTAGE (Volts)
FIG-4 TYPICAL JUNCTION CAPACITANCE
TJ=25OC f=1MHz
JUNCTION CAPACITANCE (PF)
IIFSM, PEAK FWD SURGE CURRENT (A)
IR, INSTANTANEOUS REVERSE CURRENT (uA)
NUMBER OF CYCLES AT 60 Hz
REVERSE VOLTAGE (Volts)
FIG-5 TYPICAL REVERSE CHARACTERISTICS
TJ=100OC
TJ=25OC
PERCENT OF RATED REVERSE VOLTAGE ( )
.