EN25Q16A

EN25Q16A EN25Q16A 16 Megabit Serial Flash Memory with 4Kbyte Uniform Sector FEATURES Single power supply operation - Full voltage range: 2.7-3.6 volt Serial Interface Architecture - SPI Compatible: Mode 0 and Mode 3 16 Mbit Serial Flash - 16 M-bit/2048 K-byte/8192 pages - 256 bytes per programmable page Standard, Dual or Quad SPI - Standard SPI: CLK, CS#, DI, DO, WP# - Dual SPI: CLK, CS#, DQ0, DQ1, WP# - Quad SPI: CLK, CS#, DQ0, DQ1, DQ2, DQ3 High performance - 104MHz clock rate for one data bit - 80MHz clock rate for two data bits - 80MHz clock rate for four data bits Low power consumption - 12 mA typical active current - 1 μA typical power down current Uniform Sector Architecture: - 512 sectors of 4-Kbyte - 32 blocks of 64-Kbyte - Any sector or block can be erased individually Software and Hardware Write Protection: - Write Protect all or portion of memory via software - Enable/Disable protection with WP# pin High performance program/erase speed - Page program time: 1.3ms typical - Sector erase time: 60ms typical - Block erase time 400ms typical - Chip erase time: 12 seconds typical Lockable 512 byte OTP security sector Minimum 100K endurance cycle Package Options - 8 pins SOP 150mil body width - 8 pins SOP 200mil body width - 8 contact VDFN - 8 pins PDIP - All Pb-free packages are RoHS compliant Industrial temperature Range GENERAL DESCRIPTION The EN25Q16A is a 16-Megabit (2048K-byte) Serial Flash memory, with advanced write protection mechanis...