10-Bit 2-Port NanoSwitch
PI3B3384 PI3B32384 (25Ω)111222333444555666777888999000111222333444555666777888999000111222333444555666777888999000111222...
Description
PI3B3384 PI3B32384 (25Ω)111222333444555666777888999000111222333444555666777888999000111222333444555666777888999000111222111222333444555666777888999000111222333444555666777888999000111222333444555666777888999000111222111222333444555666777888999000111222333444555666777888999000111222333444555666777888999000111222111222333444555666777888999000111222333444555666777888999000111222333444555666777888999000111222111222333444555666777888999000111222
3.3V, 10-Bit, 2-Port, NanoSwitch™
Features
Near-Zero propagation delay
Low noise, 25-ohm version (PI3B32384)
5-ohm switches connect inputs to outputs (PI3B3384)
Fast Switching Speed - 4.5ns max.
Ultra-low quiescent power (0.1µA typical) – Ideally suited for notebook applications
Packaging (Pb-free & Green available): – 24-pin 150-mil wide plastic QSOP (Q) – 24-pin 173-mil wide plastic TSSOP (L)
Description
Pericom Semiconductor’s PI3B3384 and PI3B32384 are 3.3 Volt, 10bit, 2-port bus switches designed with a low On-Resistance allowing inputs to be connected directly to outputs. The bus switch creates no additional propagational delay or additional ground bounce noise. Switches are turned ON by the Bus Enable (BE) input signal. Two bus enable signals are provided, one for each of the upper and lower five bits of the two 10-bit buses. The PI3B32384 is designed with an internal 25-ohm resistor reducing noise reflection in highspeed applications.
Block Diagram
Pin Configuration
A0 A4
A5 A9 BEA BEB
B0 B4
B5
B9 A
B
BE
BEA ...
Similar Datasheet