PI3USB221

Features VDD Operation at 2.5 V and 3.3 V VI/O Accepts Signals up to 5.5 V 1.8-V Compatible Control-Pin Inputs Low-Power Mode When OE Is Disabled (2 µA) rON = 6Ω Maximum ΔrON = 0.2Ω Typical Cio(on) = 6 pF Maximum Low Power Consumption (50 µA Maximum) ESD > 8kV contact on USB signal path per IEC61000-4-2) High Bandwidth (1.1 GHz Typical) Packaging (Pb-free & Green): - 10-contact, TDFN (ZE10) - 10-contact, TLLGA (XA10) Applications Routes Signals for USB 1.0, 1.1, and 2.0 Mobile Industry Processor Interface (MIPI) Signal Routing PI3USB221 High-Speed USB2.0 1:2 Multiplexer/ DeMultiplexer Switch with Signal Enable Description The PI3USB221 is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (1.1 GHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480 Mbps). Pin Configuration TDFN Package (Top View) TLLGA Package (Top View) TLLGA Package (Bottom View)...