Current limited over-voltage protected quad digital termination
CLT3-4B
Current limited over-voltage protected quad digital termination
Features
■ 4 channel topology ■ Wide range inpu...
Description
CLT3-4B
Current limited over-voltage protected quad digital termination
Features
■ 4 channel topology ■ Wide range input dc Voltage:
– VI= - 0.3 to 30 V with RI = 0 – VI = - 30 to 30 V with RI = 1.8 kΩ – Low side configuration with common
ground ■ Current limiter:
– IGEN = 3 mA – Input current limiter activation voltage < 5 V – Temperature compensated operation ■ Opto-coupler drive: – No coupler activation below 1.5 mA input
current ■ Input protection (RI = 1.2 kΩ):
– IEC 61000-4-2 electrostatic discharge ESD, Class 3 In contact, ± 6 kV; in air, ± 8 kV
Level B: temporary disruption; no change of opto-coupler state
– IEC 61000-4-5 voltage surge, Class 3 ± 1000 V with 42 Ω serial resistor in differential mode Level B: temporary disruption
– IEC 61000-4-4 transient burst immunity ± 4 kV peak voltage; 5 kHz repetitive rate Level A: fully functional
■ Operating ambient temperature: - 25 to 85° C
Benefits
■ Reduced overall dissipation
■ Compact with high integration
■ Enables input to meet type 1 and 3 characteristic of IEC 61131-2 standard
■ Compatible operation with 2 and 3 wires proximity sensor according EN60947-5-2 standard
■ Insensitive to the on state sensor impedance
■ Surface mount package for highly automated assembly
■ Enhanced functional reliability
TSSOP20
Applications
■ Industrial automation ■ Programmable logic controller ■ Communication field bus nodes ■ Peripheral input / output modules ■ Machine tool interface
Description
The CLT3-4 is a quadruple input digita...
Similar Datasheet