Optic Sensors
Optic Sensors
LVF-200A-R Series
Pulsed, Infrared Light Excitation (Leak Detection Solution)
SPST Relay Standard ...
Description
Optic Sensors
LVF-200A-R Series
Pulsed, Infrared Light Excitation (Leak Detection Solution)
SPST Relay Standard Impervious to Most
Ambient Light Conditions Mounted any Orientation,
Wet or Dry Nema 6 (IP68)
Submersible Sensor and Cable
LVF-210A-R, shown larger than actual size.
The LVF-200A-R Series optic sensor creates a pulsed beam of infrared light which is reflected on the oblique flat sensor tip. If the tip is dry, the light beam is recognized and if it is wet, the beam reflects back into the liquid. The optic sensor is factory calibrated for use with clear or translucent liquids. The shape and optic characteristics of the oblique flat optical surface provide a high level of optical efficiency, including resistance to ambient light and process condensation. Although the sensor offers very broad liquid compatibility, it is not recommended for use with coating or highly specular liquids. Ideal for leak detection.
Specifications
Accuracy: ±1 mm (0.04") in water Repeatability: ±0.5 mm (0.02") in water Operating Principle: Pulsed, infrared light beam Voltage Input: 12 to 36 Vdc @25 mA Relay: 60 VA, 1 A maximum Switch Mode: Selectable, SPST, NO or NC states Wetted Materials: Polypropylene (PP) or Perfluoroalkoxy (PFA) Loop Resistance: 600 Ω @ 24 Vdc
To Order
Model No.
Description
LVF-210A-R
Optic sensor
LVF-211A-R
Optic sensor
LVF-212A-R
Optic sensor
LVF-213A-R
Optic sensor
LVF-210A-G-R
Optic sensor
LVF-211A-G-R
Optic sensor
LVF-212A-G-R
Optic...
Similar Datasheet