Class1 BC04-ext Module
Rayson
Class1 BC04-ext Module
Features
■ Bluetooth Ver. 2.0+EDR certification ■ Transmit Power up to +18dBm(class1) ■ Lo...
Description
Rayson
Class1 BC04-ext Module
Features
■ Bluetooth Ver. 2.0+EDR certification ■ Transmit Power up to +18dBm(class1) ■ Low current consumption:
Hold, Sniff, Park, Deep sleep mode ■ 3.0V to 3.6V operation ■ Full Bluetooth Data rate over UART and USB ■ Support up to 7 ACL links and 3 SCO links ■ Enhanced Data Rate(EDR) compliant
for both 2Mbps and 3Mbps modulation modes ■ Interface: USB, UART&PCM( for voice codec) ■ SPP firmware with AT commands ■ RoHS Compliant ■ Small outline: 28.2 X 15.0 X 2.8 mm
Application
● Access point ● Domestics and Industrial applications ● Serial Adapter ● GPS, POS, Barcode Reader
Bluetooth ® Module BTM-222
Outline
Block Diagram
Electrical Characteristics
Absolute Maximum Ratings
Parameter
Min.
Storage Temperature
-40
Supply Voltage(VDD)
2.7
Supply Voltage(PVCC)
3.0
Other Pin Voltage
Vss-0.4
Recommended Operating Conditions
Parameter Temperature Supply Voltage for UART Supply Voltage for USB General Electrical Specification
Min. -10 3.0 3.0
Max. +85 3.6 3.3 VDD+0.4
Max. +70 3.6 3.6
Unit ℃ DCV DCV DCV
Unit ℃ DCV DCV
Parameter Carrier Frequency RF Output Power RX sensitivity Load Impedance Input Low Voltage Input High Voltage Output Low Voltage Output High Voltage Average Current Consumption
Description
Measured in 50ohm
No abnormal Oscillation RESET,UART,GPIO,PCM RESET,UART,GPIO,PCM UART,GPIO,PCM UART,GPIO,PCM Receive DM1
Min. 2.402
15 -
-0.30 0.7VDD
VDD-0.4
Typ.
16.5 -88
114
Max. 2.480
18 -86 5:1 0.80 VDD+0.3 0.40
-
Unit GHz dB...
Similar Datasheet