Nonvolatile Trimmer Potentiometer
19-5876; Rev 6/11
DS1804 Nonvolatile Trimmer Potentiometer
FEATURES
Single 100-Position Taper Potentiometer Nonvol...
Description
19-5876; Rev 6/11
DS1804 Nonvolatile Trimmer Potentiometer
FEATURES
Single 100-Position Taper Potentiometer Nonvolatile (NV) On-Demand Wiper
Storage Operates from 3V or 5V Supplies Up/Down, Increment-Controlled Interface Available in 8-Pin (300 mils) DIP, 8-Pin
(150 mils) SO, and 8-Pin (118 mils) µSOP -40°C to +85°C Operating Temperature
Range Standard Resistance Values:
– DS1804-010: 10kΩ
– DS1804-050: 50kΩ
– DS1804-100: 100kΩ
PIN ASSIGNMENT
INC 1 U/D 2
H3 GND 4
8 VCC 7 CS 6L 5W
DIP (300 mils) SO (150 mils) μSOP (118 mils)
PIN DESCRIPTION
H - High-Terminal of Potentiometer
L - Low-Terminal of Potentiometer
W - Wiper of Potentiometer
VCC - 3V or 5V Power Supply
CS - Chip Select
U/ D - Up/Down Control
INC - Increment/Decrement Wiper Control
GND
- Ground
DESCRIPTION
The DS1804 NV trimmer potentiometer is a nonvolatile digital potentiometer that has 100 positions. The device provides an ideal method for low-cost trimming applications using a CPU or manual control input with minimal external circuitry. Wiper position of the DS1804 can be stored in EEPROM memory on demand. The device’s wiper position is manipulated by a three-terminal port that provides an increment/
decrement counter controlled interface. This port consists of the control inputs CS , INC , and U/ D . The DS1804 is available in three resistor grades, which include a 10kΩ, 50kΩ, and 100kΩ. The device is provided in an industrial temperature grade. Additionally, the DS1804 will operate...
Similar Datasheet