Power Relay
INTEGRATED CIRCUITS DIVISION
Characteristics
Parameter
Blocking Voltage Load Current, TA=25°C:
With 5°C/W Heat Sink No ...
Description
INTEGRATED CIRCUITS DIVISION
Characteristics
Parameter
Blocking Voltage Load Current, TA=25°C:
With 5°C/W Heat Sink No Heat Sink On-Resistance (max) Thermal Resistance, Junction-to-Case, JC
Rating 250
6.7 2.7 0.2
0.3
Units VP
Arms / ADC
°C/W
Features
6.7Arms Load Current with 5°C/W Heat Sink Low 0.2 On-Resistance 250VP Blocking Voltage 2500Vrms Input/Output Isolation Low Thermal Resistance: JC = 0.3 °C/W Isolated, Low Thermal Impedance Ceramic Pad for
Heat Sink Applications Low Drive Power Requirements Arc-Free With No Snubbing Circuits No EMI/RFI Generation Machine Insertable, Wave Solderable
Applications
Industrial Controls / Motor Control Robotics Medical Equipment—Patient/Equipment Isolation Instrumentation
Multiplexers Data Acquisition Electronic Switching I/O Subsystems Meters (Watt-Hour, Water, Gas) Transportation Equipment Aerospace/Defense
Approvals
UL 508 Certified Component: File E69938
Pin Configuration
CPC1927
250V Single-Pole, Normally Open Power Relay
Description
IXYS Integrated Circuits Division and IXYS have combined to bring OptoMOS® technology, reliability and compact size to a new family of high-power Solid State Relays.
As part of this family, the CPC1927 single-pole normally open (1-Form-A) Solid State Power Relay is rated for up to 6.7Arms continuous load current with a 5°C/W heat sink.
The CPC1927 employs optically coupled MOSFET technology to provide 2500Vrms of input to output isolation. The op...
Similar Datasheet