Supervisory Circuit
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||...
Description
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| |||||||||||||||||||||||||||||||||||||||||||||||
Features
High accurate: 1.5% (25°C) Operating voltage range: 1.0V ~ 5.5V Operating temperature range: -40°C to + 85°C Detect voltage temperature characteristics: 2.5%
TYP Output configuration: Bi-dir Reset timeout period: typical 200ms
Pin Configuration
PT7M1233/1233A
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Supervisory Circuit
Description
The PT7M1233/1233A series are designed to monitor power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments.
The devices perform a single function: assert a reset signal whenever the VCC supply voltage falls below a preset threshold. Reset remains asserted 200ms after VCC has risen above the reset threshold.
PT7M1233/1233A are bidirectional output, allowing it to monitor a pushbutton on the reset output.
Pin Description
Name Type
Description
RST
I/O
Reset Output and Pushbutton Input: RST is asserted when VCC drops below voltage threshold VTH-. Active low. When other devices pull RST low, the reset condition occurs and will remain a reset timeout period at
least 200ms.
GND P Ground
VCC P Supply Voltage.
2013-06-0001
PT0195-4 06/17/13 1
||||...
Similar Datasheet