Document
Not Recommended for New Designs / End of Life - Please see below
MIL-COTS
MV036 SERIES
• Isolated 1-50 Vout • High density • Small footprint • ZVS / ZCS Sine Amplitude ConverterTM • 3 MHz effective switching frequency • Surface-mount package
• Low weight • -55°C to 125°C operation • 1 µs transient response • 4.5 million hours MTBF • Up to 96.5% efficiency
S C NRTL US
VTM® Chip Transformer
©
Product Description
The VTM® transformer is a VI Chip® product that provides extremely fast, efficient, and quiet fixed ratio voltage division (or current multiplication). With twelve voltage division ratios from 1:1 to 1:32, the isolated VTM provides the user with the flexibility to supply up to 100 A or 120 W at any output voltage from 1 to 50 Vdc in a surface mount package occupying ~1 square inch.
The MIL-COTS VTM®s are optimized for use with the MIL-COTS PRM® Regulator to implement a Factorized Power ArchitectureTM (FPATM). Together, the PRM + VTM chip set provides the full functionality of a DC-DC converter, but with breakthrough performance and flexibility in a rugged, miniature package. The companion PRM for the MV036 family of VTMs is the 28 Vdc input MP028F036M12AL, which operates from an input range of 16-50 Vdc (the data sheet is also available). The VTM can be used as a standalone POL product.
By factorizing the DC-DC power conversion into its essential elements – the VTM’s isolation and transformation, and the PRM’s output voltage control and regulation – and arranging those functions in a sequence that maximizes system performance, FPA offers a fundamentally new and significantly improved approach to power conversion.
The VTM’s fast dynamic response and low noise eliminate the need for bulk capacitance at the load, substantially increasing the POL density while improving reliability and decreasing cost. The low profile VTM (0.265 inches, 6,73 mm) is available with J-leads for surface mount or pins for through hole applications.
Part Numbering Format
MV 036 F 120 M 010
Voltage Transformation
Module
Input Voltage Designator
Output Voltage Designator (=VOUT x10)
Output Current Designator (=IOUT)
Configuration F = J-lead
T = Through hole
Product Grade Temperatures (°C) Grade Storage Operating (TJ)
M -65 to125 -55 to125
Product Status
Part Number
MV036F011M100 MV036F015M080 MV036F022M055 MV036F030M040 MV036F045M027 MV036F060M020 MV036F072M017 MV036F090M013 MV036F120M010 MV036F180M007 MV036F240M005 MV036F360M003
Product Status
EOL NRND NRND NRND NRND NRND NRND NRND NRND NRND NRND NRND
NRND = Not Recommended for New Designs
Replaced by
none MVTM36Bx015M080A00 MVTM36Bx022M055A00 MVTM36Bx030M040A00 MVTM36Bx045M027A00 MVTM36Bx605M020A00 MVTM36Bx072M017A00 MVTM36Bx090M013A00 MVTM36Bx120M010A00 MVTM36Bx180M007A00 MVTM36Bx240M005A00 MVTM36Bx360M003A00
MIL-COTS Chip Transformer Page 1 of 10
Rev 2.9 01/2014
vicorpower.com 800 927.9474
Not Recommended for New Designs / End of Life - Please see First Page MV036 SERIES
Absolute Maximum Ratings
Parameter
+In to -In
PC to -In VC to -In +Out to -Out Isolation voltage Output current Peak output current Output power Peak output power
Case temperature
Operating junction temperature[a] Storage temperature
Values -1.0 to 60
100 -0.3 to 7.0 -0.3 to 19.0 Model specific
2,250 Model specific
1.5 • Iout 120 180 225 245
-55 to 125 -65 to 125
Unit Vdc Vdc Vdc Vdc Vdc Vdc A A W W °C °C °C °C
Notes
For 100 ms
Contact factory Input to Output See Table 1 For 1 ms
For 1 ms MSL 5 MSL 6 M - Grade M - Grade
Note: [a] The referenced junction is defined as the semiconductor having the highest temperature. This temperature is monitored by a shutdown comparator.
Electrical Specifications
Input Specs (Conditions are at 36 Vin, full load, and 25°C ambient unless otherwise specified)
Parameter Input voltage range Input dV/dt Input overvoltage turn-on Input overvoltage turn-off Input current No load power dissipation
Min See table 1
Typ 36
50.5 54.4 55.5
1.5 4.0
Max 50 1
57.5 3.5 7.8
Unit Vdc V/µs Vdc Vdc Adc W
Note
Continuous Low line to high line
Output Specs (Conditions are at 36 Vin, full load, and 25°C ambient unless otherwise specified)
Parameter
Output voltage
Rated DC current
Peak repetitive current
DC current limit
Current share accuracy Efficiency Load capacitance Output overvoltage setpoint Output ripple voltage (typ)
No external bypass 10 µF bypass capacitor Effective switching frequency Line regulation Load regulation Transient response Response time Recovery time
Min Typ Max See Table 1
K•VIN – IO • ROUT NOM 0 100
150%
160% 5
10
Unit Vdc Vdc Adc IMAX (A)
INOM (A)
%
50 2 2.5 0.99K ROUTMIN
110%
3.0 K
200 1
115%
VOUT MAX
250 20 3.6 1.01K ROUTMAX
mV mV MHz
mΩ
ns µs
Note No load Full load 26 - 50 VIN See Table 1 Max pulse width 1ms, max duty cycle 10%, baseline power 50% Module will shut down when current limit is reached or exceeded
See Table 2, Page 3 See Table 2 when used with PRM
See Figures 2 and 5 See Figure 6 Model dependent VOUT = K•VIN .