SAW FILTER
NSTS9119 Aug. 2015
New JRC SAW FILTER
NSTS9119
Application ITS f0=760MHz BW=9MHz High ATT Type
Electrical Specificati...
Description
NSTS9119 Aug. 2015
New JRC SAW FILTER
NSTS9119
Application ITS f0=760MHz BW=9MHz High ATT Type
Electrical Specification: (Table 1) The device characteristics are measured in the circuit shown in Fig.1.
Table 1. Electrical Specifications Item Input and Output Impedance Nominal Center Frequency (f0)
Insertion Loss
755.5~764.5MHz
Response Variation
VSWR Out of Band
Rejection (Relative to Through Level)
755.5~764.5MHz 755.5~764.5MHz
750MHz
770MHz
Spec.
4.3dB max. 5.0dB max. 2.0dB max. 2.5dB max.
2.5 max. 20dB min. 10dB min. 12dB min. 5dB min.
Typical 50
760MHz 3.3dB 4.5dB 0.8dB 2.0dB 2.0 27dB 15dB
17dB 8dB
Temp.
25 5ºC -40~+85ºC
25 5ºC -40~+85ºC -40~+85ºC
25 5ºC -40~+85ºC
25 5ºC -40~+85ºC
(Operating Temperature Range : -40~+85ºC)
Maximum Rating: (Table 2)
Table2. Maximum Ratings Item Maximum Input Power Maximum DC Voltage Operating Temperature Range Storage Temperature
Rating
+20dBm
7.5V -40~+85ºC -40~+95ºC
Mechanical Specifications: (Fig.2) Package is designed as small as 3.0x3.0x1.15[mm3] for SMD (Surface Mount Device) type.
Notice: This part is electrostatic discharge sensitive and may be damaged by improper handling.
http://www.njr.co.jp/products/device/index.html Japanese http://www.njr.com/products/device/index.html English
NSTS9119 Aug. 2015
IN 50
( a)
3. 0 ± 0. 1 5
16 2 SAW 5 34
Fig.1 Measuring circuit
3. 0±0. 15 ( b)
581
IH
( c) ( 1)
OUT 50
1. 1 5 ± 0. 1 5
( 2)
( 0. 2 5) ( 0. 6) [ 2 x]
( 0. 6)
34
2
( 1. 80)
1
5 6
( 0. 5 3) [ 4x]
( 0. 45...
Similar Datasheet