Power Relay
INTEGRATED CIRCUITS DIVISION
Characteristics
Parameter
Blocking Voltage Load Current, TA=25°C:
With 5°C/W Heat Sink No ...
Description
INTEGRATED CIRCUITS DIVISION
Characteristics
Parameter
Blocking Voltage Load Current, TA=25°C:
With 5°C/W Heat Sink No Heat Sink On-Resistance (max) Thermal Impedance, Junction-to-Case, JC
Rating 400
3.35 1.35 0.85
0.35
Units VP
Arms / ADC
°C/W
Features
3.35Arms Load Current with 5°C/W Heat Sink Low 0.85 On-Resistance 400VP Blocking Voltage 2500Vrms Input/Output Isolation Low Thermal Impedance: JC = 0.35 °C/W Isolated, Low Thermal Impedance Ceramic Pad for
Heat Sink Applications Low Drive Power Requirements Arc-Free With No Snubbing Circuits No EMI/RFI Generation Flammability Rating UL 94 V-0
Applications
Industrial Controls / Motor Control Robotics Medical Equipment—Patient/Equipment Isolation Instrumentation Multiplexers Data Acquisition Electronic Switching I/O Subsystems Meters (Watt-Hour, Water, Gas) Transportation Equipment Aerospace/Defense
Approvals
UL 508 Recognized Component: File E69938
Pin Configuration
CPC1967
400V Single-Pole, Normally Open Power Relay
Description
IXYS Integrated Circuits brings OptoMOS® technology, reliability and compact size to a new family of high power Solid State Relays.
As part of this family, the CPC1967 single-pole normally open (1-Form-A) Solid State Power Relay is rated for up to 3.35Arms continuous load current with a 5°C/W heat sink.
The CPC1967 employs optically coupled MOSFET technology to provide 2500Vrms of input to output isolation. The optically coupled outputs, that use p...
Similar Datasheet