IS32LT3180
DUAL INTENSITY, LINEAR CURRENT DRIVER FOR RCL
Preliminary Information December 2014
GENERAL DESCRIPTION
The...
IS32LT3180
DUAL INTENSITY, LINEAR CURRENT DRIVER FOR RCL
Preliminary Information December 2014
GENERAL DESCRIPTION
The IS32LT3180 is an eight channel linear current
regulator for automotive rear tail light applications such as RCL (Rear Combination Lamps) and CHMSL (Center High Mounted Stop Lamps). It is fully programmable with two LED brightness levels for the different intensity requirements of “stop” bright (DC mode) and “tail” dim (PWM mode).
A logic level at the PWM pin is used to select between the tail and stop output conditions. The stop condition provides the highest intensity output, while the tail condition utilizes an internally generated PWM signal to reduce the intensity of the LEDs’ light output.
The sink current at the OUTx pins is easily set with a single resistor at the STOP pin. A second resistor at the TAIL pin sets the duty cycle of the internal PWM oscillator for dimming (less bright) the LED output when operating in the tail condition.
An external FET (optional) can be implemented for operation with wide varying supply voltages.
The IS32LT3180 is offered in an eTSSOP-16 package.
FEATURES
Output current programmable from 10mA to 75mA
Tail duty cycle programmable from 1% to 95% Linear voltage
regulator to optimize consumption
on device Low dropout voltage of 0.8V@35mA Slew rate control on each output for better EMI
performance PWM logic level input selects between full
brightness and PWM dimming levels FAULT reporting LED open/short cir...