1.5A FLASH/TORCH LED DRIVER
IS31BL3233A
2MHz, 1.5A FLASH/TORCH LED DRIVER
Preliminary Information September 2014
GENERAL DESCRIPTION
The IS31BL32...
Description
IS31BL3233A
2MHz, 1.5A FLASH/TORCH LED DRIVER
Preliminary Information September 2014
GENERAL DESCRIPTION
The IS31BL3233A is the ideal power solution for high-power flash LEDs used with cell phone camera modules or digital still cameras. It is a highly integrated step up DC-DC converter with very high switching frequency, fixed at 2MHz, providing a very small total solution for portable photo flash. The IS31BL3233A has separate Flash Mode and Torch Mode enable pins for maximum flexibility. The Flash Mode and Torch Mode LED current is programmed by external resistors respectively, making the flash LED solution simple to control. If both enable pins are at logic high, the LED current will be programmed by the Torch Mode setting resistor. The two LED output sinks can be shorted together externally for higher power single flash LEDs, up to 1.5A continuous LED current. Thermal regulation is integrated in Flash Mode to limit the IC’s temperature and continuously provide the maximum allowed output current.
Various protection features are built into the IS31BL3233A, including cycle-by-cycle input current limit protection, output over-voltage protection, LED fault (open or short) protection and thermal shutdown protection. The IS31BL3233A is available in a RoHS compliant DFN-14 (2mm × 3mm) package.
FEATURES
Input voltage range: 2.7V~5.5V Dual flash LED outputs Drive up to total 1.5A or 0.75A per channel 1s time out in Flash Mode to protect LED High efficiency up to 93% (1...
Similar Datasheet