PIC18F26K40 High-Performance Microcontrollers Datasheet

PIC18F26K40 Datasheet, PDF, Equivalent


Part Number

PIC18F26K40

Description

High-Performance Microcontrollers

Manufacture

Microchip

Total Page 30 Pages
Datasheet
Download PIC18F26K40 Datasheet


PIC18F26K40
PIC18(L)F26/45/46K40
28/40/44-Pin, Low-Power, High-Performance
Microcontrollers with XLP Technology
Description
These PIC18(L)F26/45/46K40 microcontrollers feature Analog, Core Independent Peripherals and
Communication Peripherals, combined with eXtreme Low-Power (XLP) technology for a wide range of
general purpose and low-power applications. These 28/40/44 -pin devices are equipped with a 10-bit
ADC with Computation (ADCC) automating Capacitive Voltage Divider (CVD) techniques for advanced
touch sensing, averaging, filtering, oversampling and performing automatic threshold comparisons. They
also offer a set of Core Independent Peripherals such as Complementary Waveform Generator (CWG),
Windowed Watchdog Timer (WWDT), Cyclic Redundancy Check (CRC)/Memory Scan, Zero-Cross
Detect (ZCD) and Peripheral Pin Select (PPS), providing for increased design flexibility and lower system
cost.
Core Features
• C Compiler Optimized RISC Architecture
• Operating Speed:
– DC – 64 MHz clock input over the full VDD range
– 62.5 ns minimum instruction cycle
• Programmable 2-Level Interrupt Priority
• 31-Level Deep Hardware Stack
• Three 8-Bit Timers (TMR2/4/6) with Hardware Limit Timer (HLT)
• Four 16-Bit Timers (TMR0/1/3/5)
• Low-Current Power-on Reset (POR)
• Power-up Timer (PWRT)
• Brown-out Reset (BOR)
• Low-Power BOR (LPBOR) Option
• Windowed Watchdog Timer (WWDT):
– Watchdog Reset on too long or too short interval between watchdog clear events
– Variable prescaler selection
– Variable window size selection
– All sources configurable in hardware or software
Memory
• Up to 64K Bytes Program Flash Memory
• Up to 3728 Bytes Data SRAM Memory
© 2018 Microchip Technology Inc.
Datasheet
DS40001816F-page 1

PIC18F26K40
PIC18(L)F26/45/46K40
• 1024 Bytes Data EEPROM
• Programmable Code Protection
• Direct, Indirect and Relative Addressing modes
Operating Characteristics
• Operating Voltage Ranges:
– 1.8V to 3.6V (PIC18LF26/45/46K40 )
– 2.3V to 5.5V ( PIC18F26/45/46K40)
• Temperature Range:
– Industrial: -40°C to 85°C
– Extended: -40°C to 125°C
Power-Saving Operation Modes
• Doze: CPU and Peripherals Running at Different Cycle Rates (typically CPU is lower)
• Idle: CPU Halted While Peripherals Operate
• Sleep: Lowest Power Consumption
• Peripheral Module Disable (PMD):
– Ability to selectively disable hardware module to minimize active power consumption of unused
peripherals
• Extreme Low-Power mode (XLP)
– Sleep: 500 nA typical @ 1.8V
– Sleep and Watchdog Timer: 900 nA typical @ 1.8V
eXtreme Low-Power (XLP) Features
• Sleep mode: 50 nA @ 1.8V, typical
• Windowed Watchdog Timer: 500 nA @ 1.8V, typical
• Secondary Oscillator: 500 nA @ 32 kHz
• Operating Current:
– 8 uA @ 32 kHz, 1.8V, typical
– 32 uA/MHz @ 1.8V, typical
Digital Peripherals
• Complementary Waveform Generator (CWG):
– Rising and falling edge dead-band control
– Full-bridge, half-bridge, 1-channel drive
– Multiple signal sources
• Capture/Compare/PWM (CCP) modules:
– Two CCPs
– 16-bit resolution for Capture/Compare modes
– 10-bit resolution for PWM mode
• 10-Bit Pulse-Width Modulators (PWM):
© 2018 Microchip Technology Inc.
Datasheet
DS40001816F-page 2


Features PIC18(L)F26/45/46K40 28/40/44-Pin, Low-P ower, High-Performance Microcontrollers with XLP Technology Description These PIC18(L)F26/45/46K40 microcontrollers f eature Analog, Core Independent Periphe rals and Communication Peripherals, com bined with eXtreme Low-Power (XLP) tech nology for a wide range of general purp ose and low-power applications. These 2 8/40/44 -pin devices are equipped with a 10-bit ADC with Computation (ADCC) au tomating Capacitive Voltage Divider (CV D) techniques for advanced touch sensin g, averaging, filtering, oversampling a nd performing automatic threshold compa risons. They also offer a set of Core I ndependent Peripherals such as Compleme ntary Waveform Generator (CWG), Windowe d Watchdog Timer (WWDT), Cyclic Redunda ncy Check (CRC)/Memory Scan, Zero-Cross Detect (ZCD) and Peripheral Pin Select (PPS), providing for increased design flexibility and lower system cost. Core Features • C Compiler Optimized RISC Architecture • Operating Speed: – DC – 64 MHz clock input over t.
Keywords PIC18F26K40, datasheet, pdf, Microchip, High-Performance, Microcontrollers, IC18F26K40, C18F26K40, 18F26K40, PIC18F26K4, PIC18F26K, PIC18F26, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)