Document
MBR1620CT THRU MBR16100CT
SCHOTTKY BARRIER RECTIFIER
Reverse Voltage - 20 to 100 Volts Forward Current - 16.0 Amperes
TO-220AB
0.160 (4.05) 0.140 (3.55)
0.105 (2.67) 0.095 (2.41)
0.415(10.54) MAX
0.410(10.41) 0.390(9.91)
PIN 123
0.154(3.91) DIA 0.148(3.74)
0.113(2.87) 0.103(2.62)
0.635(16.13) 0.625(15.87)
0.185(4.70) 0.175(4.44)
0.057(1.45) 0.051(1.30)
0.145(3.68) 0.135(3.43)
0.350(8.89) 0.330(8.38)
0.560(14.2) 0.530(13.4)
1.148(29.16) 1.118(28.40)
0.590(14.22) 0.530(13.46)
0.110(2.79) 0.100(2.54)
0.037(0.94) 0.027(0.68)
0.105 (2.67) 0.095 (2.41)
0.205 (5.20) 0.195 (4.95)
PIN 1
PIN 3
PIN 2 CASE
0.022(0.58) 0.014(0.35)
Dimensions in inches and (millimeters)
FEATURES
The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 Construction utilizes void-free molded plastic technique Low reverse leakage High forward surge current capability High temperature soldering guaranteed: 250 C,0.25”(6.35mm) from case for 10 seconds
MECHANICAL DATA
Case: TO-220AB molded plastic body Terminals: Leads solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Weight:0.080 ounce, 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
MDD Catalog Number
SYMBOLS
MBR
1620CT
MBR MBR
1630CT 1640CT
MBR MBR MBR MBR MBR MBR MBR
1645CT 1650CT 1660CT 1670CT 1680CT 1690CT 16100CT
UNITS
Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current (see fig.1)
VRRM VRMS VDC
I(AV)
20 30 40 45 50 60 70 80 90 100 VOLTS 14 21 28 32 35 42 49 56 63 70 VOLTS 20 30 40 45 50 60 70 80 90 100 VOLTS
16.0 Amps
Peak forward surge current
8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 8.0A Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C
IFSM VF IR
0.55 15.0
150.0
0.75 1.0
0.85 50.0
Amps
Volts mA
Typical junction capacitance (NOTE 1) Typical thermal resistance (NOTE 2) Operating junction temperature range Storage temperature range
CJ RθJC TJ TSTG
500 -50 to +125
360 2.0
-50 to +150 -50 to +150
pF C/W
C C
Note:1.Measured at 1MHz and applied reverse voltage of 4.0V D.C.
2.Thermal resistance from junction to case
RATINGS AND CHARACTERISTIC CURVES MBR1620CT THRU MBR16100CT
AVERAGE FORWARD RECTIFIED CURRENT, AMPERES
FIG. 1- FORWARD CURRENT DERATING CURVE
20
16
12 Single Phase Half Wave 60Hz Resistive or inductive Load
8
4 MBR1620CT-MBR1645CT MBR1650CT-MBR16100CT
0 0 25 50 75 100 125 150 175
AMBIENT TEMPERATURE, C
FIG. 3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
50
10
TJ=25 C 1 PULSE WIDTH=300 µs
1%DUTY CYCLE
0.1 MBR1620CT-MBR1645CT MBR1650CT-MBR1660CT MBR1670CT-MBR16100CT
0.01 0.2 0.4 0.6 0.8 1.0 1.1
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
INSTANTANEOUS REVERSE CURRENT, MILLIAMPERES
PEAK FORWARD SURGE CURRENT, AMPERES
FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT
150
125
8.3ms SINGLE HALF SINE-WAVE (JEDEC Method)
100
75
50
25 1 10
NUMBER OF CYCLES AT 60 Hz
100
FIG. 4-TYPICAL REVERSE CHARACTERISTICS
100
10 TJ=100 C
1
TJ=75 C 0.1
0.01 TJ=25 C
0.0010
20 40
60 80 100
PERCENT OF PEAK REVERSE VOLTAGE,%
INSTANTANEOUS FORWARD CURRENT,AMPERES
TRANSIENT THERMAL IMPEDANCE, C/W
JUNCTION CAPACITANCE, pF
FIG. 5-TYPICAL JUNCTION CAPACITANCE
2000
1000
TJ=25 C
FIG. 6-TYPICAL TRANSIENT THERMAL IMPEDANCE
100
10
100
10 0.1
MBR1620CT-MBR1645CT MBR1650CT-MBR16100CT
1.0 10
REVERSE VOLTAGE,VOLTS
100
1
0.1 0.01
0.1 1
10
t,PULSE DURATION,sec.
The cruve graph is for reference only, can't be the basis for judgment()!
100
.