DatasheetsPDF.com

TIC206D Dataheets PDF



Part Number TIC206D
Manufacturers Inchange Semiconductor
Logo Inchange Semiconductor
Description Triacs
Datasheet TIC206D DatasheetTIC206D Datasheet (PDF)

isc Triacs TIC206D FEATURES ·With TO-220 package ·Sensitive Gate Triacs ·Glass Passivated ·Max IGT of 5 mA (Quadrants 1~3) ·100% avalanche tested ·Minimum Lot-to-Lot variations for robust device performance and reliable operation ABSOLUTE MAXIMUM RATINGS(Ta=25℃) SYMBOL PARAMETER MIN UNIT VDRM Repetitive peak off-state voltage 400 V VRRM Repetitive peak reverse voltage 400 V IT(RMS) RMS on-state current (full sine wave)TC=85℃ 4 A ITSM Non-repetitive peak on-state current 25 A .

  TIC206D   TIC206D



Document
isc Triacs TIC206D FEATURES ·With TO-220 package ·Sensitive Gate Triacs ·Glass Passivated ·Max IGT of 5 mA (Quadrants 1~3) ·100% avalanche tested ·Minimum Lot-to-Lot variations for robust device performance and reliable operation ABSOLUTE MAXIMUM RATINGS(Ta=25℃) SYMBOL PARAMETER MIN UNIT VDRM Repetitive peak off-state voltage 400 V VRRM Repetitive peak reverse voltage 400 V IT(RMS) RMS on-state current (full sine wave)TC=85℃ 4 A ITSM Non-repetitive peak on-state current 25 A Tj Operating junction temperature 110 ℃ Tstg Storage temperature -45~150 ℃ Rth(j-c) Thermal resistance, junction to case 7.8 ℃/W Rth(j-a) Thermal resistance, junction to ambient 62.5 ℃/W ELECTRICAL CHARACTERISTICS (TC=25℃ unless otherwise specified) SYMBOL PARAMETER CONDITIONS IDRM Repetitive peak off-state current VD=VDRM, TC=110℃ Ⅰ IGT Gate trigger current Ⅱ Vsupply = 12 V†; RL= 10Ω; tp(g) >20μs Ⅲ Ⅳ IH Holding current Vsupply = 12 V†, IG= 0 initial ITM= 100mA VGT Gate trigger voltage all quadrant Vsupply = 12 V†; RL= 10Ω; tp(g) >20μs VTM On-state voltage IT= 8.4A; IG= 50mA MAX 1.0 5 5 5 10 30 2.0 1.7 UNIT mA mA mA V V isc website:www.iscsemi.cn 1 isc&iscsemi is registered trademark Notice: ISC reserves the rights to make changes of the content herein the datasheet at any time without notification. The information contained herein is presented only as a guide for the applications of our products. ISC products are intended for usage in general electronic equipment. The products are not designed for use in equipment which require specialized quality and/or reliability, or in equipment which could have applications in hazardous environments, aerospace industry, or medical field. Please contact us if you intend our products to be used in these special applications. ISC makes no warranty or guarantee regarding the suitability of its products for any particular purpose, nor does ISC assume any liability arising from the application or use of any products, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. isc website:www.iscsemi.cn 2 isc&iscsemi is registered trademark .


TIC126N TIC206D TIC206M


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)